PP PVDF Plastic Q-Pack Packing as Industrial Water Filter

China PP PVDF Plastic Q-Pack Packing as Industrial Water Filter, Find details about China 95mm Q Pak, Plastic Q-Pack Packing from PP PVDF Plastic Q-Pack Packing as Industrial Water Filter

Basic Info.

Model NO.

BT-PQP

Origin

Pingxiang, China

HS Code

3926909090

Model NO.

BT-PQP

Origin

Pingxiang, China

HS Code

3926909090

Product Desciption

Plastic Q-pack
It was designed on basic of HD/Q Pac's frame. Compare with original one; it has small volume, easily operation and installation, high efficiency in oil-water separator.
Additionally, This Polypropylene media has natural affinity for oil, and provide high surface area in the form of uniformly spaced rods with no narrow joints that tend to trap sludge particles. Round rods pointing downward allow suspended solid particles to fall from the coalescing media into the sludge compartment for periodic collection

Effluent water treatment

Q-pack large pore volumes and surface areas make it an ideal media for biological treatment of effluent water. Biofilm processes are excellent for treating water containing nitrogen, BOD etc. Many years of experience has shown that Filtralite is the perfect media for these types of plants.

Q-pack can not only be used in traditional effluent water treatment, but also for odour treatment at sewage treatment works. The porous material is excellent for use in biofilters for removal of hydrogen sulphate and other biodegradable odorous compounds.

Biological filtration

Among the essential parts in the biological aerated filters, (BAF), is the filter media. The biomass that treats organic and nitrogenous matters is fixed to the Filtralite medium, which also works well as a mechanical filter for suspended solids. Filtralite is used both in processes of aerobe systems (nitrification and organic matter) and anoxic systems (denitrification).

Tertiary filtration

As water is a scarce resource in many parts of the world, reuse of water has become more and more normal. To be able to reuse the effluents, tertiary filtration for removal of suspended solids is necessary. The same will be the situation in areas with extra sensitive recipients.

Q-pack has proved to be as good as, or better than, comparable filter media, both in single- and dual media filters. In dual media filters, by replacing the most traditional top layer filter material, anthracite, with Q-pack, time between backwashes can be increased by about 25%. This means fewer stops for backwash and reduced use of backwash water, resulting in more stable operation and lower operational costs.

In single media filters usingQ-pack the time between backwashes has been recorded to be up to 4-5 times as long as for filt ers using sand as filter media.

Q-pack with Filtralite can be operated within a large range of filtration rates. The filtration rate will always be dependent of the configuration of the filter and the treatment process. Filtralite tertiary filters can operate at up to around 15-20 m/h.

Physical & chemical properties of plastic tower packing:

Property /Material	PE	PP	RPP
Density g/cm³	0.94-0.96	0.89-0.91	0.93-0.94
Application temperature	90	>100	>120
Chemical corrosion resistance	good	good	good
Compression Strength	90	>100	>120

Specification

Dimension (mm)	Number per m3	Bulk density	Void ratio (%)	Packing factory (m-1)	Drop point
		(kg/m3)
Φ95*82.5	1165	33.7	96.3	23	388

Advantages

1.Small volume
2.Easily operation and installation
3.High efficiency in oil water separatore

PP PVDF Plastic Q-Pack Packing as Industrial Water Filter

Related hot products: