Products

GPS & Glonass Antenna Module with Size Mt3333 Chipset Gnss Module

China GPS & Glonass Antenna Module with Size Mt3333 Chipset Gnss Module, Find details about China GPS Module, GPS&Glonass Module Antenna from GPS & Glonass Antenna Module with Size Mt3333 Chipset Gnss Module

Model NO.
DM2107-G
Package
Plastic Tray , Paper Cartoon
Communication Type
Uart/Ttl
Weight
Approx 3.1g
Trademark
DeliNComm
Transport Package
Plastic Tray, Paper Cartoon
Specification
Module Size: 21x7.0x6.6mm
Origin
China
Model NO.
DM2107-G
Package
Plastic Tray , Paper Cartoon
Communication Type
Uart/Ttl
Weight
Approx 3.1g
Trademark
DeliNComm
Transport Package
Plastic Tray, Paper Cartoon
Specification
Module Size: 21x7.0x6.6mm
Origin
China
GPS & Glonass Antenna Module with Size MT3333 chipset  GNSS module 

General Description
        The DeliNComm DM2107-G is a complete GPS&GLONASS engine module that features super sensitivity, ultra low power and small form factor. The GPS&GLONASS signal is applied to the antenna input of module, and a complete serial data message with position, velocity and time information is presented at the serial interface
with NMEA protocol or custom protocol.
        Its -165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense 
foliage environment where the GPS&GLONASS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems.

Applications
  1. LBS (Location Based Service)
  2. PND (Portable Navigation Device)
  3. Vehicle navigation system
  4. Mobile phone
Features
  1. Build on high performance, low-power MediaTek MT3333 chip set
  2. Ultra high Track sensitivity: -165dBm
  3. Extremely fast TTFF at low signal level
  4. Built in high gain LNA
  5. Low power consumption: Max 45mA@3.3V
  6. NMEA-0183 compliant protocol or custom protocol
  7. Operating voltage: 2.8V to 4.3V
  8. Operating temperature range:-40to85ºC
  9. Patch Antenna Size: 20x6x3.5mm
  10. Module Size: 21x7.0x6.6mm
  11. Communication type: UART/TTL
  12. RoHS compliant (Lead-fre)
GPS & Glonass Antenna Module with Size Mt3333 Chipset Gnss Module
GPS & Glonass Antenna Module with Size Mt3333 Chipset Gnss Module

  1.2.Power Supply

        Regulated power for the DL-2107N-GGCM is required. The VCC Pin Need a stable DC voltage supply. Power supply ripple must be less than 30mV. The input voltage Vcc should be 2.8V~4.3V, Recommended power supply voltage is 3.3V . maximum current is 40mA. Suitable decoupling must be provided by external decoupling circuitry.

   1.3.UART Ports

        The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 115kbps. UART port can be used for firmware upgrade, NMEA output and PMTK proprietary commands input.
                                        
 Product Picture                                                                
 GPS & Glonass Antenna Module with Size Mt3333 Chipset Gnss Module


 

You Might Also Like