API Certificated Welded Double Bow Spring Centralizer
Slips On Centralizers are provided for direct installation on pipe by slipping on and can be providing with Set Screw for elimination of Stop collar.
The purpose of the Bow Spring Centralizer, both welded and non-welded, is to help center the casing in the wellbore, allowing even distribution of the cement around the casing during cementing operations. The degree to which the casing is centered depends on the performance of the centralizer and the spacing between the centralizers installed on the casing OD. Bow Spring Centralizers also help reduce casing drag in the wellbore during running operations and prevent differential stroking of the casing. They increase fluid turbulence at the tool, helping to move filter cake from the wellbore. Both welded and non-welded Bow Spring Centralizers can be run through hole restrictions in the bore hole or smaller casing strings that are cemented in the well, which in turn centers the casing below the restriction.
Model(in) | Hooping In-Dia (mm) | Hooping thickness(mm) | Hooping height(mm) | Total Length(mm) | Max. Out-Dia.(mm) | Spring Pieces |
5-1/2*8-1/2 | 142-148 | 3-5 | 90-120 | 650±50 | 225±5 | 5 |
7*9-5/8 | 181-186 | 3-5 | 90-120 | 650±50 | 255±5 | 6 |
7*8-1/2 | 181-186 | 3-5 | 90-120 | 650±50 | 235±5 | 6 |
8-5/8*12-1/4 | 223-228 | 3-5 | 90-120 | 650±50 | 330±5 | 8 |
9-5/8*12-1/4 | 250-255 | 3-5 | 90-120 | 650±50 | 330±5 | 8 |
10-3/4*12-1/4 | 274-276 | 3-5 | 90-120 | 650±50 | 330±5 | 9 |
13-3/8*17-1/2 | 342-347 | 3-5 | 90-120 | 650±50 | 450±5 | 11 |
18-5/8*24 | 476±1 | 3-5 | 90-120 | 600±50 | 610±5 | 12 |
20*26 | 510±1 | 3-5 | 90-120 | 600±50 | 660±5 | 12 |



Main products:
1. pumping unit
2. Tubing pump/sucker rod pump and accessories
3. Float collar and float shoe
4. Casing centralizer
5. Cementing plug
6. Cementing head
7. Stage Collar
8. Casing/ Tubing coupling
9. Drill pipe
10. Sucker rod