Products

Serva Auto Density Control Double Pump Cementing Skid Made in China
Serva Auto Density Control Double Pump Cementing Skid Made in China

Serva Auto Density Control Double Pump Cementing Skid Made in China

Serva Auto Density Control Double Pump Cementing Skid Made in China, Find details about China Cementing, Cementing Skid from Serva Auto Density Control Double Pump Cementing Skid Made in China

Engine
Explosion- Proof
Electric Part
Explosion-Proof
Density Control
Auto
Pump
Single Plunger Pump
Trademark
SERVA
Transport Package
Export Standard
Origin
China
HS Code
8430412200
Engine
Explosion- Proof
Electric Part
Explosion-Proof
Density Control
Auto
Pump
Single Plunger Pump
Trademark
SERVA
Transport Package
Export Standard
Origin
China
HS Code
8430412200

Skid mounted cementing equipment is mainly utilized in offshore or remote areas on land, such as desert where the vehicles are difficult to reach. Three kinds of major cementing plunger pumps of TPA400, TPH400 or TPB600 and variety of plunger size can be selected according to different operating conditions. The unit is fully considered the anticorrosion for offshore application. Zone-II explosion-proof unit is also developed, for the characteris­tics of offshore platform
I.Overview
PCS-821B Auto density control double pump cementing skid is newly developed cementing equipment based on QPA1000 plunger pump and ACM-IV.1 auto mixing system.
QPA1000 pump is applicable for deep well cementing, sand control equipments, small and medium-sized fracturing jobs. With features of light weight and compact structure, it is the new model with power between 600HP and 1800HP which fills up the gap with no suitable cementing plunger pump. Many components of QPA1000 and TPB/TPD600 pump can be used interchangeably. The high energy mixing system of the skid is mainly driven by two transmissions PTO. The entire skid is compact, applicable for the areas with strict requirements for space, such as offshore drilling platform, etc.
2.General specification
Pressure range: Max. pressure 14,140Psi (97.5MPa, w/3" fluid end)
Max. Flow: 7m3/min (w/ two 4 1/2" fluid ends)
Density range: 1.3~2.5g/cm3
Auto control precision: ±0.02 g/cm3
Mixing capacity: 0.3~2.3m3/min
Working temperature: -20°C - 50°C
Overall dimension (mm): 7200(L) x3100(W) x3250(H)
Net weight: 28000kg
3. Technical Specification
Technical specification
EngineCaterpillar C27 1150 HP@2100 RPM (2sets)
TransmissionAllision S8610
Hydraulic systemDriven by transmission PTO, closed loop for c-pumps, open loop for agitators
Triplex pump (2 sets)
Model/typeSERVA QPA1000 Reciprocal, horizontal single action plunger pump
Stroke6" (152.4mm)
Max. B.H.P.1000 BHP (746Kw)
Gear ratio4.6:1
Fluid End3"3 1/2"4"4 1/2"
Rated pressure14,140Psi (97.5MPa)10,000Psi (69MPa)7,958Psi(56.1MPa)6,290Psi(43.4MPa)
Max. discharge rate1.65 m3/min2.13 m3/min2.78 m3/min3.52m3/min
ACM-IV1mixing system
MixerHigh energy recirculating jet mixer
Dry cement valveoff-center bulk cement metering valve
Mixing Water pumpSERVA 4X3 (1.5 m3/min@0.78MPa)
Slurry recirculating/booster pumpSERVA RA56 (3.7 m3/min@0.45MPa) (two sets)
DensitometerMicro Motion 3" F300 non-radioactive densitometer
Computer systemAB PLC
Others
Mixing tank8 BBL (1.4 m3)Fuel tank1500 L (optional)
Measuring tank2X10 BBL (2X1.5 m3)Hydraulic oil tank200 L
Air tank80L  
Serva Auto Density Control Double Pump Cementing Skid Made in China  Serva Auto Density Control Double Pump Cementing Skid Made in China


4.  Features
    • Off-center dry cement valve avoids bulk from choking.
    • Emergency kill system of air inlet shutoff.
    • Plunger pump overpressure protection system.
    • SPS non-leakage packing system.
    • Emergency mixing system.
    • F300 Non-radioactive densitometer is easy to wash, safe and reliable.
    • Simplify operation, adapt to working habits in oilfield.
    • 10" operation screen, convenient to monitor the working data.
    • Portable wireless/ wired data acquisition system.

You Might Also Like