CR9506 HF Reader

• Category:NFC Reader
• Product number:CR9506
• product feature:CR9506 NFC Reader Module 
  ST32G0 With ST25R3911 RFID 
  ISO14443 TYPE A/B ,T=CL
  ISO15693
  P2P
  Wide Working Temperature

NFC 13.56 Mhz RFID Reader   CR9506:

   MIFARE® 1k/4K, UltraLight ,ULTRALIGHT C,   MIFARE® PLUS ,  MIFARE® Desfire

   NTAG203,NTAG213 ,NTAG215,NTAG216

  25TB512 ,25TB04K,25TB176

Application scopes

• e-Government

• Banking & Payment

• Access Control Time Attendance

• Network Security

• e-Purse & Loyalty

• Transportation

• Kiosk

• Intelligent Meters

Technical Specification

• Power supply:4.5V--5.5V, 40-105mA 
• Interface: USB Virtual RS232, RS232 or TTL232 
• Transmission speed: Default 19200 bps 
• R/W distance of up to 100mm (up to 100mm with bigger antenna size), depending on TAG 
• Storage temperature: -40 ºC ~ +85 ºC 
• Operating temperature: -30ºC ~ +70 ºC 
• ISO14443A ISO14443B  ISO15693

CR9506 Reader High quality RFID IC ST25R3911 and STM32G070 MCU

RFID Chip Features

• ISO 18092 (NFCIP-1) Active P2P

• ISO14443A, ISO14443B, ISO15693 and FeliCa™

• Automatic antenna tuning system providing tuning of antenna LC tank

• Automatic modulation index adjustment

• AM and PM demodulator channels with automatic selection

• User selectable and automatic gain control

• Transparent and stream modes to implement MIFARE™ classic compliant or other custom protocols

• Possibility of driving two antennas in single ended mode

• Oscillator input capable of operating with 13.56 MHz or 27.12 MHz crystal with fast start-up

• 6 Mbit/s SPI with 96 bytes FIFO

• Wide supply voltage range from 2.4 V to 5.5 V

• Wide temperature range: -40 °C to 125 °C

• QFN32, 5 mm x 5 mm package

 ISO 18092 (NFCIP-1) initiator, ISO 18092 (NFCIP-1) active target, ISO 14443A and B reader (including high bit rates), ISO 15693 reader and FeliCa™ reader.

• Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C operating temperature • Memories - 128 Kbytes of Flash memory - 36 Kbytes of SRAM (32 Kbytes with HW parity check)

• Including 3DES AES Soft algorithm encryption Support Ultralight C,MIFARE™ Plus,Desfire Read Write

 Communication setting

  The communication protocol is byte oriented. 
  Both sending and receiving bytes are in hexadecimal format. 
  The communication parameters are as follows, 
  Baud rate: 19200 bps 
  Data: 8 bits 
  Stop: 1 bit 
  Parity: None 
  Flow control: None

 Dimensions & Other Description 

CR9506 Serials&Similar Part Number Description:

Similar product Part number reference

COMMENT:  MIFARE® and MIFARE Classic® are trademarks of NXP B.V.