Blue Algae Sewage  Treatment Equipment Volute Sludge Dewatering Machine with Factory Price Snail Sludge Dewatering Machine



The dewatering body of the stacked screw sludge dewatering machine is composed of a concentration section and a dehydration section, a spiral shaft runs through it, and the concentration section and the dehydration section are respectively composed of a fixed ring and a movable ring. Equipped with an independent automatic cleaning system, the swimming ring is driven by the spiral shaft during the dehydration operation, and the filter seam can be cleaned in time, and the textile solid block the filtering area; while saving clean water, it can ensure the continuous and stable operation of the equipment .

Features:

1.Widely Use
a. Can be widely used in municipal sewage, food, slaughtering breeding, printing and dyeing, oil chemical industry, paper making, leather, pharmaceutical and other industries of sludge dewatering;

b. Exclusive pre-concentration design, applicable sludge concentration of 2000mg/L-50000mg/L;

c. Due to the innovation of the structure design, it is highly suitable to various high and low concentration sludge, most especially for the oily ones.

2.Clog-free
Due to rotation of helical axis, the moving rings begin detaching from the fixed rings while continuously starting the self-cleaning process. As a result, the ubiquitous clogging is avoided. Therefore, it can handle oily sludge without any trouble while separating the water from the sludge easily. In addition, there is no need to add large quantity of flushing water and there is no odor and no secondary pollution during the dewatering process.

3.Fully Automatic Control
There are no easily blocked pieces such as belt and filtration pore in Multi-Disk Screw Press. Combining with the auto control system, the machine runs very safely and simply and can be programmed according to the requirement of the users. It can operate automatically for 24 hours, unmanned.

4. No secondary pollution
The screw shaft rotational speed about 2~3r/min, no vibration and noise is very small ; The laminated with self - cleaning function, plugging does not occur, only a small amount of water washing, without secondary pollution, and sludge at such a slow running under the operating condition, the smell does not spread, thereby creating a great work environment!

5.Promote the phosphorus removal capability
Dewatering sludge under aerobic conditions, it does not occur phosphorus release, so as to enhance phosphorus removal function of the whole sewage treatment system.

6.Suit for Oily Sludge
The self-cleaning mechanism and stainless steel structure enables DL to be ideal to dewater oily sludge.

7.Save Running Cost
 Multi~Disk Screw Press works by the machine's internal pressure and needs no large scale integrations like rollers. It saves energy and water and has very minimal noise because of low running speed (2-4 r/min). The average unit power consumption is only 0.1-0.01kwh/kg-DS (1/8 of Belt Press and 1/20 of Centrifuge), and can greatly reduce the running cost of wastewater treatment system.

8.Lightweight and durable
Due to the direct mechanical dewatering extrusion without rollers and other large body, so the machine is in lightweight; the body almost entirely made of stainless steel, replacement parts are only screw shaft and moving rings, it is durable with long service time.

9.Decrease Project Investment
 Multi~Disk Screw Press can treat sludge in aeration tank and secondary sedimentation tank without setting sludge thickeners. Therefore, this can decrease the total investment, avoid phosphorus release from the sludge thickeners and sludge storage tanks and enhance phosphorus removal effect of the wastewater treatment system.

1).Suitable for sludge dewatering of high/low consistency. When deal with low consistency sludge (2000mg/L), there is no need to build a thickening tank, storage pool. Reduce the cost and the release of phosphorus and Anaerobic stink.

2).There is no need to worry about jam up. Reduce the cleaning water consumption.

3).The dewatering screw press electrical cabinet, disposal tank and dehydrator are integrated, which reduces the covering area and brings convenience to installment.

4).The dehydrator is enclosed working, which reduces the bad smell and improves the working environment.

5).Automatically working for 24 hours, reducing the labor strength of workers.

6).The slow running speed of screw shaft reduces the power consumption and noise.

7).Dewatering screw press made with stainless steel, extending the service life.

8).Dewatering screw press convenient for daily maintenance.



Solution Advice:   Installation &. Operation Guide.
You can provide us the water sources, water quality, flow rate and ground area, material requirements about your project, then more technical solutions will be suggested to you.
 
Why choose us 
1. We consistent good quality with reasonable price.
2. Big company, good reputation, more reliable.
3. Delivery in time.
4. Over 15 years' experience since 1991.
5.Considerable after-sales service.
 
Our Services
1.24-hour a day, 365-day a year access to a toll-free health care professional hotline for questions and trouble-shooting assistance FREELY.
2.all year round on site installation and debugging service abroad with professional engineer guide and training.

Packaging & Delivery
Packaging Details  Seaworthy package
Delivery Time      Within 20 days after receipt of deposit     

Application:
1.  Municipal water and wastewater treatment plants

2.  Agricultural/fishery community wastewater treatment plants

3.  Industrial waste treatment plants

4.  Food/beverage production plants

5. Dairy farming/Meat processing plants

6.  Chemicals manufacturing plants

7.  Machinery manufacturing/Metal processing plants

8.  Laundry wastewater

9.  Other plants requiring dewatering machine (paper manufacturing, building material manufacturing, oilfield associated water accompanied with crude oil mining, etc.)




FAQ

We always put the quality as the first consideration! If you need further information , feel free to contact Us! We are more than happy to help you with any inquiry. Call us or send us an email, and we'll be ready to assist you.

1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing water processing equipment for more than 10 years.

2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.1137, Zhucheng city, Shandong Province, China. It is about 2 hours from Qingdao airport. We can pick you up if you need, welcome to visit our factory.

3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.

4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.

5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.

6. Q: How to buy your idea products?
A: You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).

7. Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.

8. Q: What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

9. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.

10. Q: How to keep your equipment from corrosion?
A: We use the world-famous paint, like SigmaCoatings, PainBow,etc. What's more, we paint strictly according to the standard process.

11. Q: How do you manufacture your equipment?
A: Our machining technology includes laser/plasma cutting, automatic welding, CNC cutting and bending.

12. Q: How to install after the equipment arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.


Any questions, please feel free to contact donna!!!