Introduction of Sheet specification
Width of raw materials: 350 ~ 650mm
Material thickness: 2 ~ 3mm
Material length: 1000 ~ 3000mm
,Finished product
Sheet specification
Width: 350 ~ 650mm
Thickness: 0.5 ~ 0.8mm
Sheet length: 1000 ~ 3000mm
,Product precision
Longitudinal thickness deviation: thickness less than 0.5mm, the allowable deviation of + 0.04mm
Plate thickness of 0.5mm ~ 0.8, the allowable deviation of + 0.06mm
Roughness: less than 10mm/m
Camber plate: less than 2mm/m
,Main technical parameters of the unit
Max rolling pressure: 500 tons
Max  rolling speed: 120 m/min
Belt speed: 30m/min
Work roll size: diameter 350 / 310 * 750 mm
Roll size: diameter 600 / 550 * 700 mm
Frame column section: 25 * 30=750 - CM
Max opening degree of work roll: 30 mm
Positive / negative bending force of work roll: -1200 / kN +2200 (bilateral)
General hydraulic transmission system pressure: 15 Mpa (working pressure)
Balance bending roll system pressure: 25 Mpa (working pressure)
Pressure system pressure: 25 Mpa (working pressure)
Motor power of main rolling mill: kW N=200 * 1