Anchor Dead End Clamp for Self Support ABC Cable
China Anchor Dead End Clamp for Self Support ABC Cable, Find details about China Anchoring Connector, Cable Connector from Anchor Dead End Clamp for Self Support ABC Cable
Basic Info.
Model NO.
2.1
Weight
138g
Destructive
2-5kn
Material
Nylon Plus Fiber Glass PA66
Trademark
SMICO
Transport Package
Export Carton
Specification
Anchoring clamp
Origin
China
HS Code
8536909000
Model NO.
2.1
Weight
138g
Destructive
2-5kn
Material
Nylon Plus Fiber Glass PA66
Trademark
SMICO
Transport Package
Export Carton
Specification
Anchoring clamp
Origin
China
HS Code
8536909000
Product Desciption
2.1ABC Cable Aerial Electrical Fittings Anchoring Connector
(Performance testing)
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting.
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998,
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng.
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks.
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4
Introduction
The anchoring clamp is designed to anchor LVABC lines with insulated neutral messenger.
The stainlessteel flexible bail is equipped with an movable insulating saddle and the two sleeves are compressed on the ends and locked on the clamp body.
Feature
1.High mechanical stability
2. Reduced dimensions for easier handling
3. The cable gripping device avoids damage to sheath
| MODEL | CROSS-SECTION( mm2) | Destructive |
| 2.1 | 16-25 | 2-5KN |
(Performance testing)
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting.
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998,
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng.
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks.
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover