Fiber Optical ADSS Cable Clamp
China Fiber Optical ADSS Cable Clamp, Find details about China Anchoring, Overhead from Fiber Optical ADSS Cable Clamp
Basic Info.
Model NO.
PA-3000
Trademark
no
Transport Package
Carto
Specification
plastic
Origin
China
Model NO.
PA-3000
Trademark
no
Transport Package
Carto
Specification
plastic
Origin
China
Product Desciption
FOR ADSS CABLES INSTALLED ON SHORT SPANS (100M MAX)
PRODUCT OVERVIEW
These clamps are designed for dead-ending aerial ADSS cables on access networks when spans do not exceed 100m. Different capacities are available to adapt to the cable Ø.
APPLICATION
These clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :
• at jointing poles
• at intermediate angle poles when the cable route deviates by more than 20°.
• at intermediate poles when the two spans are different in lengths
• at intermediate poles on hilly landscapes
FEATURES
• Dead-ending of 6 to 20 mm ADSS cables
• Minimum breaking load of 500/600 daN
• Installation on any pole hardware fitting :
brackets, cross-arms or eye bolt with a min eye Ø of 15 mm
• 4kV thimble as standard. 11 kV thimble available
• All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environment
DESCRIPTION
These anchoring clamps are made of an opened conical body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation.
Range
PRODUCT OVERVIEW
These clamps are designed for dead-ending aerial ADSS cables on access networks when spans do not exceed 100m. Different capacities are available to adapt to the cable Ø.
APPLICATION
These clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :
• at jointing poles
• at intermediate angle poles when the cable route deviates by more than 20°.
• at intermediate poles when the two spans are different in lengths
• at intermediate poles on hilly landscapes
FEATURES
• Dead-ending of 6 to 20 mm ADSS cables
• Minimum breaking load of 500/600 daN
• Installation on any pole hardware fitting :
brackets, cross-arms or eye bolt with a min eye Ø of 15 mm
• 4kV thimble as standard. 11 kV thimble available
• All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environment
DESCRIPTION
These anchoring clamps are made of an opened conical body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation.
Range
| Clamp Type | Capacity(mm) | Min breaking load(Kn) |
| PA-3000(8-12) | 8-12 | 6 |
| PA-3001(12-16) | 12-16 | 6 |
| PA-3002(16-20) | 16-20 | 6 |
You Might Also Like
Plastic Paving Concrete Mold DIY Walkway Stones Mould Landsc......
Baroque Freshwater Pearl Necklace fashion Jewelry Jewellery ......
China Professional Made Super Big Size Ductile Iron Flange P......
Supermarket Storage Container Plastic Folding Stackable Coll......
Plastic Disposable Hitachi Beckman Sample Cup
Bulk Pen Drive Wood USB Flash Drive
Debo 5 Years Warranty HPL Toilet Cubicle Board
Luxury Hotel 1500 Supreme Collection Bed Sheet Set
Sodium Hyaluronic Acid Gel Injection for Lip, Face, Nose, Br......
Fenugreek Seed Extract 4-Hydroxyisoleucine for Improve Insul......
Rechargeable Battery 25ah 3.2V LiFePO4 Battery Cell
Radial Truck Tyre 10.00r20 11.00r20 12.00r20, TBR