1.4876 Incoloy 800ht Incoloy Alloy Seamless Alloy Pipe Uns N08811 W. Nr.
China 1.4876 Incoloy 800ht Incoloy Alloy Seamless Alloy Pipe Uns N08811 W. Nr., Find details about China Incoloy 800ht, Stainless Steel Pipe from 1.4876 Incoloy 800ht Incoloy Alloy Seamless Alloy Pipe Uns N08811 W. Nr.
1.Specification:
| Product Details | |
| Product name | Incoloy 800HT Incoloy Alloy Seamless Alloy Pipe Uns N08811 W.Nr.1.4876 |
| Brand name | ABOOM |
| Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 |
| Material | N08367 Al-6XN 1.4501 Incoloy25-6hn NAS 255NM |
| Surface | Pickling, 400grit polishing, 600grit polishing, mirror finish |
| Certificate | BV, LR, GL, NK, RMRS |
| Packing | In bundles with waterproof material, in wooden cases |
| Shipment | By sea, by air, by express |
Material designation: Incoloy 800HT nickel based alloy
US grade: NO8811
German grade: W.Nr.1.4876
Incoloy 800HT (NO8811) nickel based alloy overview:
Incoloy800HT (N08811) is a full-austenitic low-carbon nickel-iron-chromium alloy of the same series as Incoloy 800. The cobalt content in this alloy can be strictly controlled below 0.01%.
Incoloy800HT (N08811) is resistant to many corrosive media. Its higher nickel content makes it resistant to stress corrosion cracking in aqueous corrosion conditions. The high chromium content makes it better resistant to pitting and crevice corrosion cracking. The alloy has good resistance to the corrosion of nitric acid and organic acids, but has limited corrosion resistance in sulfuric acid and hydrochloric acid.
In addition to the possibility of pitting corrosion in halides, it has good corrosion resistance in oxidizing and non-oxidizing salts. It also has good corrosion resistance in water, steam and mixtures of steam, air and carbon dioxide. Used in nitric acid condensers, resistant to nitric acid corrosion, steam heating, good mechanical properties, heating element tubes, good mechanical properties, etc. For applications up to 500 ° C, the alloy is supplied in the annealed state.
Chemical composition of Incoloy 800HT (NO8811) nickel based alloy: see Table-1:
Table-1 %
| C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr≥ | Ni≥ | Mo≥ | Cu≤ |
| 0.06-0.10 | 1.0 | 1.50 | 0.035 | 0.015 | 19.0-23.0 | 30.0-35.0 | - | - |
| Others | Al+ Ti | Al≤ | Ti≤ | Fe≤ | Co≤ | V≤ | W≤ | Nb≤ |
| 0.85-1.20 | 0.15-0.60 | 0.15-0.60 | 39.5 | - | - | - | - |
specification:
Outer diameter Φ6-762mm; wall thickness: 0.5-50mm, maximum length 18000mm
Special specifications are available upon negotiation.
2.
| Chemical Composition(%) | |||||||||||
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
| 202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | ||
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | |||
| 302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | |||
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | |||
| 304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | |||
| 310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | |||
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | |||
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | |||
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | |||
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | - | ||||
| 2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | |||
| 2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | |||
| 904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | 1.0~2.0 | ||
| INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | ||
| MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | ≤34.0 | ||
| INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
Packaging & Shipping
| Packaging Detail | Each tube is loaded into plastic bag individual, and then several pieces were wrapped in one bundle |
| Delivery Time | 30 days |
-- FAQ --
Q1:Are you factory or trading company?
A:We are professional manufacturer .
Q2:What are the advantages of your company?
A: We have many professional technical personnel.And we have more competitive prices and better after-sales service than trading companies.
Q3:How do you control the quality?
A:Our company is certificated to ISO9001:2008.We have many inspectors and every product will have been tested for 4-5 processes.
We welcome customers or the third party inspection agencies to come to our factory for inspection.
Q4:How long is your delivery time?
A:Different products have different delivery time.The products will be delivered as soon as possible on the basis
of the quality assurance.Usually the delivery time is within 10-20 days after we recieved your desipot.
-- Contact US --
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier