Technology Principle

Picosecond laser is a solution to eliminate melanin freckle, skin whitening thenew
technology, it can be a powerful and fast energy shattered melanin, to improve the color
of the skin, to achieve the purpose of the whitening skin! The PicoSecond Laser uses
ultra-short pulses (one trillionth of a second inlength) to hit the melanin with a great
pressure, the melanin shatters into tinydust-like particles. Because the particles are so
small, they are more readily absorbed and eliminated by the body. This can mean better
clearance of themelanin and less treatments overall. PicoSecond Laser is a quick and
easy, non-surgical, non-invasive laser skin treatment for the body including chest or
decollete, face,hands,legs,and more.

The difference between picosecond and Q-switched laser

In the Q-switched technology before the birth of the picosecond technology, it can be said
that the picosecond is an upgrade of Q-switching, both of which can be frecked, and the
effect of picoseconds will be better. The difference between the two: The main principle of
Q-switched laser technology is selective photothermal action, which mainly acts on melanin
in the epidermis and dermis through thermal effects. Under the action of Q-switched laser,
the fragments of melanin chromophores are larger, and there is a certain color-sinking period
after phagocytosis by macrophages. Compared with the Q-switched laser, the picosecond
laser has a shorter pulse width and higher peak power. The biological effect on the skin is
mainly optomechanical. The mechanical impact of the optomechanical wave can completely
make the pigment with a wide range of diameters. Disintegration of the particles, even if the
total pulse energy is much smaller than the nanosecond laser energy, can completely
disintegrate most of the pigment particles in the entire irradiation area. The finer pigment
particles produced by the picosecond laser irradiation are more easily phagocytosed by
macrophages, so the pigment clearance rate is high. In addition, the picosecond laser has a
shorter action time than the Q-switched laser by 1-3 orders of magnitude. The energy required
to achieve the same therapeutic effect is less than that of the Q-switched laser. The heat
dispersion to the surrounding tissue is less than the heat dispersion caused by the Q-switched
laser. The damage of the surrounding normal tissue is smaller, the pain in the patient's
treatment is lighter, and the corresponding adverse reactions are also significantly reduced.



Light energy performance
1. Single pulse energy: Jm ≥ 1500mj
2. Laser output instability: S ≤ ± 15%
3. Laser output energy reproducibility: Rj <10%
4. Output energy and energy display error: ≤ ± 20%
5. Surgery spot diameter: 1-4nm range continuously adjustable
6. Spot positioning focusing accuracy: the error ≤ ± 0.5mm
7. Multi-joint light guide arm adjustment range: ≥ 45 ° in the horizontal plane, the vertical
height from the ground between 60cm - 80cm.

Tips functions

1. 1064nm: effectively remove dark tattoos, eyebrows, lips, eye lines and traumatic
pigmentation and freckles. 
2. 532nm:  suitable for treating red or tan tattoos, eyebrows, lip lines, eyeliners. It can
effectively dilute red or tan birthmarks and various shallow spots.
3. 755nm: freckles, chloasma, age spots, dry spots, dermal spots and other intractable
spots. Red and black cockroaches.
4. Black-faced doll head Rejuvenation whitening, shrinking pores.

About Treatment 

1.Indications
This instrument is mainly used to remove some exogenous and endogenous cyan, blue,
black and brown pigment lesions in the clinic, such as: tattoo, freckles, butterfly spots,
age spots, dermal spots (external Pigment residue), skin whitening and skin tone to brighten.
2.Treatment interval 
This instrument is mainly used to remove some exogenous and endogenous cyan, blue,
black and brown pigment lesions in the clinic, such as: tattoo, freckles, butterfly spots, age
spots, dermal spots (external Pigment residue), skin whitening and skin tone to brighten.
3.Treatment times :3-5 times 
The general case requires multiple treatments to obtain better results. The number of
treatments for a specific patient depends on the concentration and depth of the pigment in
the affected area, the composition of the pigment, the laser dose used in each treatment,
and the macrophage to pigment particles in the patient. The absorption situation and other
factors are determined. Generally, exogenous pigments must be treated more than 3 times,
and endogenous pigments must be treated more than 5 times to obtain satisfactory results.
The effect of a few patients after multiple treatments is still not satisfactory.

Technical Specification

Real Picture


About Us
Started from Year 2009, Guangzhou Allfond Electronics Co.,Ltd is one of the most 
professional manufacturers making various kinds of top beauty and slimming equipment,
including: 

(1). Cavitation RF vacuum machine
(2). IPL (Intense Pulsed Light) Hair Removal machines
(3). RF (Radio Frequency) Skin Rejuvenation Systems
(4). No needle mesotherapy machine
(5). LED Skin Rejuvenation beauty machines
(6). Micro needle derma pen /derma roller
(7). Diamond and crystal microdermabrasion Systems
(8). Cryolipolysis cavitation rf machine
(9). Teeth whitening machine
(10). SPA capsules 
(11). Provide OEM ODM service

    We insists on the ideal of "technology innovation, professional manufacturer, and 
sincerely service" and the operating principle "customer priority, and mutual benefits". 
Quality is the soul of our company.

FAQ

1. What's your warranty?
Our machine has one year warranty, during the first 3 months, if happen non-human
-caused broken, we can ship the spare part to you, the shipping cost will pay by the
customers,in the other 9 months , we just charge a little cost for spare parts.

2. If the machines broken during the shipment, how to do?
Once you received the machine, the package is damaged, please complain to the
sending person and get a complain number, We will contact shipping company for
compensation. As usual this problem rate less than 0.1% according to our experience.

3. Do you offer OEM/ODM service?
Yes, it's avaiable.

4. How to pay?
The payment by T/T, Western Union, MoneyGram is acceptable.