Products

Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)
Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)

Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)

China Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher), Find details about China Spiral Steel, Puncher Pipe from Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)

Thickness
0.8-3 mm
Coil Width
120-200 mm
Length
4-8 M
Punched Hole
Round Hole
Installation Power
30kw
Trademark
HUAYE
Transport Package
in Nude
Origin
China
Thickness
0.8-3 mm
Coil Width
120-200 mm
Length
4-8 M
Punched Hole
Round Hole
Installation Power
30kw
Trademark
HUAYE
Transport Package
in Nude
Origin
China
Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)Introduction:
Water filter pipes are pipes with punched holes on the wall. These pipes are widely used in all types of underground water process projects.
The holes on the pipe walls are of different profiles. The most common and advanced profile is the bridge type hole.
Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)
The filter pipes are produced in different ways. In old conventional way, the holes are milled or drilled on the wall after pipes are produced. In this way, not only the hole quality and production efficiency is very low, but also the profiles of holes are limited to round hole or long rectangular holes. The most advantage bridge holes are not possible.
Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)

Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)Right Hand Type Spiral Forming Spiral Pipe Mill (With Puncher)
 

You Might Also Like