Marine Boat Mooring Floating Pneumatic Rubber Fenders

China Marine Boat Mooring Floating Pneumatic Rubber Fenders, Find details about China Rubber Fender, Pneumatic Rubber Fenders from Marine Boat Mooring Floating Pneumatic Rubber Fenders

Fender Type
Net Type with Chain and Tire Net
Initial Pressure
50kpa & 80kpa
Standard
ISO 17357
Trademark
Doowin Marine
Specification
as Client Requested
Origin
China
Fender Type
Net Type with Chain and Tire Net
Initial Pressure
50kpa & 80kpa
Standard
ISO 17357
Trademark
Doowin Marine
Specification
as Client Requested
Origin
China

Floating pneumatic rubber fenders are known as Yokohama fenders or Yokohama-type pneumatic fenders. Floating pneumatic rubber fenders are made of the synthetic-cord-reinforced rubber sheet with compressed air inside. The insider air can enable it to float on the water and work as a shock absorbed between two ships (ship-to-ship), or between ships and berthing structures when they come alongside each other on the water. All Doowin Marine Yokohama type floating pneumatic rubber fenders are manufactured and tested fully compliant with ISO 17357

Floating pneumatic rubber fenders can be easily handled and installed with guy-rope or guy-chain because of their lightweight. It can resist the shearing force and maintain energy absorption level under inclined compression up to 15 degrees. Meanwhile, provide low and comparatively even hull pressure.

Consisted of several synthetic-cord layers and tough abrasion-resistant rubber, they have consistent performance even under rough conditions and cyclic load. The maintenance cost and damage risk are minimized too. The best material also ensures self-buoyancy and extremely long service life.

Marine floating pneumatic rubber fenders are available from 500 mm to 4,500 mm in diameters, and from 500 mm to 9,000 mm in length. All sizes of pneumatic rubber marine fenders are available as sling-type or with a heavy-duty chain & tire net.  We also supply vertical hydropneumatic fenders for submarines.

Note: The floating pneumatic rubber fenders have sometimes been colloquially referred to as "Yokohama Fenders" or "Yokohama type fenders" - ISO 17357:2002 Ships and marine technology - High-pressure floating pneumatic rubber fenders.
 

Pneumatic Fender ItemMarine Pneumatic Rubber Fender Parameter
Fender Diameter0.5 - 4.5m
Fender Length1.0 - 9m
Initial Pressure50kPa and 80 kPa
Fender TypeSling type, Net type, Hydro Type
Fender StandardIS0 17357: 2014
Fender ApplicationShip-to-ship, ship-to-port

Marine Boat Mooring Floating Pneumatic Rubber FendersMarine Boat Mooring Floating Pneumatic Rubber FendersMarine Boat Mooring Floating Pneumatic Rubber Fenders