Optical Fast Connector Optical Performance
(Reference to China Standard Q/CT 2299-2010-6.1)

Unit( dB)

Code

Test Item

Mechanical  Q/CT 2299-2010-Chapter6.1

Fusion Splicer Type
YD/T 2341.2-2011-Chapter 4.7

Average Value

Maximum Value

Average Value

Maximum Value

a

Insertion Loss

≤0.3

Tested with standard plugs and adapters:≤0.5
Test with any plug and adapter:≤0.7

≤0.25

Tested with standard plugs and adapters:≤0.4
Test with any plug and adapter:≤0.7

b

Return Loss

≥40(UPC);≥55(APC)

≥50(UPC);≥60(APC)

Mark1: IL and RL Test at 1310nm. If need test 1550nm, Please tell us first.

Mark2:IL and RL average and Maximum vale make as customer's requirement.

Mark3:Return Loss can customized  UPC standard -45~-50dB;APC Standard -55~-60dB

Optical Fast Connector mechanical character
(Reference to standard Q/CT 2299-2010-6.3)

Unit( dB)

ITEM

Tet Name

Test conditions

Judgement Standard

Insertion Loss Variation

 Test Result

Mechanical

Fusion Splicer

a

Repeatable
Assemblability

Assemblability Times: 5 Times

≤0.3

No Requirement

No mechanical damage, no obvious scratches on the pin surface

b

vibration

frequency: 10-50Hz
Sweep frequency:45 Times per minute
Amplitude: 0.75mm Single Amplitude
Time:Three director ,each 2 hours

≤0.3

≤0.25

No mechanical damage, such as deformation, cracking, slack, etc.

c

Drop

Height:1.5meter from sample head
Test times: 8 Times

≤0.3

≤0.25

No mechanical damage, such as deformation, cracking, slack, etc

d

Repeat Plug

Plug Times: 10

≤0.3

≤0.25

No mechanical damage, such as deformation, cracking, slack, etc

e

mechanical
Durability

Plug Times: 500

≤0.3

≤0.25

No mechanical damage, such as deformation, cracking, slack, etc

f

Tensile

Telcom  Standard Q/CT 2299-2010-7.14:
0.125mm bare fiber: 4N,
No online monitoring of Optical performance;
0.25mm fiber type :4N
No online monitoring of Optical performance;
0.9mm fiber type :10N
online monitoring of Optical performance;
Fiber optic cable :20N
online monitoring of Optical performance;
Fiber optic cable :30N
No online monitoring of Optical performance;;
Time:2 Minute

≤0.3

≤0.25

No mechanical damage, such as deformation, cracking, slack, etc

j

Tensile

Communication Standard YD/TT 2341.1-2011-5.15
Load weight:250μm fiber: 4N
900μmFiber : 10N
Fiber optic cable 2.0mm and drop cable  :20N
Fiber optic cable 3.0mm: 50N;
Load Time: fiber 30s,fiber optic cable 2min;
Load rate: 50N/min The distance between the load point and the mechanical field connector: L=22cm~28cm

≤0.3

≤0.20

No mechanical damage, such as deformation, cracking, slack, et

g

Twist

Load Weight:Fiber Optic cabel 15N
Rate: 10 Times/Minute
times: 200Times

≤0.3

≤0.25

No mechanical damage, such as deformation, cracking, slack, et

Mark 1: Fusion Splicer type can not be  repeatable assembly test;

Mark 2:Repeat assembly testing is Mainly assess the deterioration of the amount of insertion loss.
It requirment insersion loss  deterioration  ≤0.3. If insersion loss become better,then it
is qualified ;

Mark 3:After Test, Return Loss Variation≤5dB

Item

a

Operating temperature

-40ºC ~+85ºC

b

Storage temperature

-40ºC ~+85ºC

c

Relative humidity

≤95%(+30ºC hours)

d

Atmospheric pressure

62kPa~106kPa