Automatic auto extract for cold chamber die casting machine (160t-3000t)1.The main parts and electrical components applied are all imported parts, with low failure rate and long service life, (such as JAPAN NSK bearing, JAPAN SMC or JAPAN CKD, U.S.A. ACE buffer, JAPAN KOYO encoder and JAPAN photoelectric switch, and the Taiwan SHINE linear slide rail and Taiwan CPG reducer etc.2.Applying multi-link vertical plane motion type arm, with high carrying capacity, suitable for using in large die casting machine. Applying imported decelerating motor, Mitsubishi PLC and Taiwan frequency converter control, stable and no-impact high-speed running3.Due to applying decelerating motor driving arm PLC and frequency converter control, so that the arm can stand-by at any point within its stroke range (before the mould opening, the arm go forward in advance to the edge of mould waiting), which effectively shorten the take out cycle and improve productivity4.Applies English HMI touch screen, can conveniently set up a variety of parameters, real-time monitor the machine state and with failure self-diagnosis and display function, which allow convenient operation and maintenance5.Work independently, or connect with die casting machine, ladle unit, spray unit to form an integral fully automatic equipment6.Japan's absolute value encoder is applied, which made the adjustment of arm position realizing digitization7.May stand-by at the edge of mould, greatly improved productivity.


Model | LH-1 | LH-2 |
For Die Casting Machine | 125T-200T | 250T-400T |
Remove Weight | 3KG | 4KG |
Arm Stroke | 1550mm | 1650mm |
Crosswise Stroke | 300mm | 300mm |
Arm Motor | 0.75KW | 0.75KW |
Clip Claw Diameter | 40-60 | 50-70 |
Power Supply Capacity | 380V/1KV | 380V/1.2KV |
Cycle Time | 10SEC | 12SEC |
PS:WE RESERVE THE RIGHT TO MAKE ANY TECHNICAL IMPROVEMENT WITHOUT FURTHER NOTICECompany Introduction Bengbu Longhua , founded in 1982, is a professional high-tech enterprise engaged in the design, manufacture and sale of cold chamber die casting machines, die casting peripheral equipments, oil field equipments and new energy equipments (natural gas, nitrogen, wellhead, casing, raw materials, liquefied petroleum gas, special gas, compressor).
On November 7, 2017, Longhua won the national high-tech enterprise certificate!
On June 26, 2019, Longhua was successfully listed in the National Science and Technology Innovation Special Edition!
Longua intelligent die-casting machines are applicable to manufacture of automobile and motorcycle parts (engine cylinder block, cylinder head, crankcase, hinged door covers, oil pan, gearbox housing, gearbox end cap, dashboard, etc.), electric escalator handrail/steps, industrial/road/railway/air/agricultural machinery, spotlight shells, building material parts, furniture, aluminum arts, copper arts, magnesium alloy products, non-ferrous metal processed products and other die casting products.
Longhua's quality goal is that "Today's quality means tomorrow's market".
Cooperative R&D Unit Longhua intelligent
die casting machine is jointly developed with hefei institute of material science, Chinese academy of sciences, with automatic system upgrade, one-click operation, zero fault, making die casting more efficient, more precise, more intelligent and more durable.