Car production line check track for Trolley overhead drive chain conveyor line

Straight track: Used where the conveyor chains go straight. Standard length for delivery is 3 meters. It can be cut to its use according to its specific installing conditions.

Bush track: Can be used for straight track connecting place within the furnace, take-up device can be used too. Straight track can stretch or shrink freely with the bushing so that shape can't be changed under hot or cold conditions.

Vertical Track ( Up track Down track): Used on the rising or falling areas where the conveying chains pass, with standard diameter 1.2M x 180°. It also can be cut based on any necessary angles of any installing conditions. But the angle should not be more than 45°, and the distance between two adjacent hangers should be considered.

Horizontal Track: Used for conveying chain pass horizontal area. Standard diameter 0.8m-2m x180°, it can be cut based on any necessary angles for specific installing conditions. Also horizontal bending head can be customized by special requirements.

Check Track: There is an opening that can open the track, through which the conveyor chain can be disassembled, inspected and repaired, and the drive of each conveyor line should be equipped with a set of inspection tracks. It is generally located between the outlet of the drive unit and the tensioning device for easy inspection and maintenance.

Speciality:

1. Efficient shockproof

2. High quality steel with good rust resistance and acid resistance

3. Round arch design

4. Wide range of applications for all kinds of walking automatic lines

5. Various type and sufficient storage

Providing customized services!