Products

Spraying Rigid Polyurethane Foam SPF for Roof Wall Insulation

China Spraying Rigid Polyurethane Foam SPF for Roof Wall Insulation, Find details about China PU Foam, System House from Spraying Rigid Polyurethane Foam SPF for Roof Wall Insulation

Model NO.
SDA33D-Z02
Trademark
shunda
Specification
200kg
Origin
China
HS Code
39072090
Model NO.
SDA33D-Z02
Trademark
shunda
Specification
200kg
Origin
China
HS Code
39072090
DESCRIPTION
SDA33D-Z02 building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building roof. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. The strong adhesive force, convenient construction and no seams.
  2. The low thermal conductivity, low water absorption and good dimensional stability.
  3. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical ProperitiesTest MethodMetricValue
Core DensityGB/T 6343-2009kg/m345.3
Compressive StrengthGB/T 8813-2008kPa264
Tensile StrenghtGB/T 9641-88kPa136
Oxygen indexGB/T 2406.2-2009 %23.4
Initial Thermal ConductivityGB/T 10294-2008W/(m·K)0.022
Close Cell ContentGB/T 10799-2008%≥88
Water AbsorptionGB/T 8810-2005%≤3
Dimensional Stability
(Foam made After 6 days)		-25ºCGB/T 8811-2008%≤±1
≤±1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 

Spraying Rigid Polyurethane Foam SPF for Roof Wall Insulation
Spraying Rigid Polyurethane Foam SPF for Roof Wall Insulation
Spraying Rigid Polyurethane Foam SPF for Roof Wall Insulation
Spraying Rigid Polyurethane Foam SPF for Roof Wall Insulation


 

You Might Also Like