Hydroxyethyl cellulose

Name Hydroxyethyl cellulose

Physical And Chemical Indicators

Specification

Production Process

Hydroxyethyl cellulose (HEC) consists of two parts: one is cellulose, and the other is hydroxyethyl branch. SKAC hydroxyethyl cellulose is produced by reacting purified cellulose with sodium hydroxide to generate alkaline fiber colloid, adding ethylene oxide to the colloid, and then modifying it. SKAC hydroxyethyl cellulose can play the role of thickening, bonding, dispersing, stabilizing, etc., and can store water, form a film and provide protective colloids

Application Performance

(1)Hydroxyethyl cellulose can provide excellent leveling, without sagging, wrinkles, etc. 

(2) Hydroxyethyl cellulose is not affected by the PH value of the system, its thickening efficiency, and has excellent compatibility with other component materials such as pigments, additives, salts or electrolytes

(3) Hydroxyethyl cellulose can improve splash resistance

(4) Hydroxyethyl cellulose has excellent sag resistance

(5) Adding hydroxyethyl cellulose can reduce the use of associative thickeners and reduce costs

(6) Hydroxyethyl cellulose is easy to disperse and can effectively prevent agglomeration

(7) Hydroxyethyl cellulose is easy to use, it can be dissolved in hot or cold water with stirring equipment, and the solution can be directly added to the product

(8) Hydroxyethyl cellulose will not reduce the surface tension of the product, and will not produce unnecessary foam during the production process

Use

Hydroxyethyl cellulose (HEC) is widely used in exterior texture paint, latex paint and real stone paint.

Packaging, Storage And Transportation

It can be packed in paper-plastic composite bag lined with polyethylene plastic bag, cardboard drum or plastic coated, etc. The net weight of each piece is 25KG. During storage and transportation, it should be protected from sun and rain, fire and moisture.    

HEC-SK300

Name   Hydroxyethyl cellulose

Model  SK300

Product Description

Yida Hydroxyethyl Cellulose (HEC) SK300 is a product specially developed by Yida scientific research team for texture paint and latex paint. The product has good thickening and suspension effect, high water retention rate, small addition amount, and low product unit price to reduce production costs. 

Scope Of Application

SK300It is widely used in the production of internal and external wall latex paint and texture paint, which has a good thickening and suspension effect.

Performance

Add Way

(1) Pre-dissolve in other containers beforehand, weigh the water in the specific steps, stir with an electric drill, and slowly add hydroxyethyl cellulose until it is completely dissolved. Pour the pre-dissolved cellulose solution directly into it during the formal production process

(2) Directly and slowly sprinkle hydroxyethyl cellulose in the production process to completely dissolve

(3) Half of it is pre-melted, and half is sprinkled in the production process Regardless of whether the pre-solution is made or the hydroxyethyl cellulose is directly sprinkled in the production process, it should not be poured all at once. Only use utensils or hands to slowly sprinkle, try to avoid cellulose clumping In the production process, do not add multifunctional additives before adding hydroxyethyl cellulose, otherwise the cellulose is easy to clump and lumpy

Precautions:

During the production process, the equipment must be turned on when the hydroxyethyl cellulose is sprinkled, and the cellulose can be sprinkled slowly after the equipment is rotated. Viscosity change: a momentary high-viscosity state and a rough state. After a few minutes of continued stirring, the viscosity will stabilize and the state will improve significantly. If you simply test the viscosity of the aqueous solution of cellulose, you can complete the aqueous solution on the first day, test the viscosity on the second day, and observe the state. Because there are many bubbles in the freshly prepared aqueous solution, the transparency and viscosity test indicators are not accurate due to their influence

Recommended Dosage

The recommended dosage of this product is 2-4‰ of the system, and the dosage needs to be determined by experiment

Packaging And Storage

After the product is opened and used, it must be sealed in time; This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration; Sealed and stored in a cool and dry place at 0-40ºC, and the storage time should not exceed 24 months.

Technical Support

During the preparation of various formula systems for this product, the Yida technical team can provide technical consultation, technical tracking, and long-term optimization of the formula system.

HEC-SK500

Name Hydroxyethyl cellulose

Model SK500

Product Description

Yida hydroxyethyl cellulose (HEC) SK500 is a product specially developed by Yida scientific research team for latex paint. The product has good thickening and suspension effect, high water retention rate, small addition amount, and low product unit price to reduce production costs.

Scope Of Application

SK500It is widely used in the production of latex paint for interior and exterior walls, and can play a very good thickening and suspension effect

Performance

AddWay

(1) Pre-dissolve in other containers beforehand, weigh the water in the specific steps, stir with an electric drill, and slowly add hydroxyethyl cellulose until it is completely dissolved. Pour the pre-dissolved cellulose solution directly into it during the formal production process

(2) Directly and slowly sprinkle hydroxyethyl cellulose in the production process to completely dissolve

(3) Half of it is pre-melted, and half is sprinkled in the production process Regardless of whether the pre-solution is made or the hydroxyethyl cellulose is directly sprinkled in the production process, it should not be poured all at once. Only use utensils or hands to slowly sprinkle, try to avoid cellulose clumping In the production process, do not add multifunctional additives before adding hydroxyethyl cellulose, otherwise the cellulose is easy to clump and lumpy

Precautions:

During the production process, the equipment must be turned on when the hydroxyethyl cellulose is sprinkled, and the cellulose can be sprinkled slowly after the equipment is rotated. Viscosity change: a momentary high-viscosity state and a rough state. After a few minutes of continued stirring, the viscosity will stabilize and the state will improve significantly. If you simply test the viscosity of the aqueous solution of cellulose, you can complete the aqueous solution on the first day, test the viscosity on the second day, and observe the state. Because there are many bubbles in the freshly prepared aqueous solution, the transparency and viscosity test indicators are not accurate due to their influence

Recommended Dosage

The recommended dosage of this product is 2-4‰ of the system, and the dosage needs to be determined by experiment

Packaging And Storage

After the product is opened and used, it must be sealed in time; This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration; Sealed and stored in a cool and dry place at 0-40ºC, and the storage time should not exceed 24 months.

Technical Support

During the preparation of various formula systems for this product, the Yida technical team can provide technical consultation, technical tracking, and long-term optimization of the formula system.

HEC-SK1000

Name    Hydroxyethyl cellulose

Model   SK1000

Product Description

Yida Hydroxyethyl Cellulose (HEC) SK1000 is a product specially developed by Yida scientific research team for real stone paint. The product has good thickening and suspension effect, high water retention rate, good spraying, and less sand falling. Small addition amount, low product unit price can reduce production costs

Scope Of Application

 SK1000Widely used in the production of real stone paint, it has a good thickening and suspension effect

Performance

Add Way

(1)Pre-dissolve in other containers beforehand, weigh the water in the specific steps, stir with an electric drill, and slowly add hydroxyethyl cellulose until it is completely dissolved. Pour the pre-dissolved cellulose solution directly into it during the formal production process

(2) Directly and slowly sprinkle hydroxyethyl cellulose in the production process to completely dissolve

(3) Half of it is pre-melted, and half is sprinkled in the production process Regardless of whether the pre-solution is made or the hydroxyethyl cellulose is directly sprinkled in the production process, it should not be poured all at once. Only use utensils or hands to slowly sprinkle, try to avoid cellulose clumping In the production process, do not add multifunctional additives before adding hydroxyethyl cellulose, otherwise the cellulose is easy to clump and lumpy

Precautions:

During the production process, the equipment must be turned on when the hydroxyethyl cellulose is sprinkled, and the cellulose can be sprinkled slowly after the equipment is rotated. Viscosity change: a momentary high-viscosity state and a rough state. After a few minutes of continued stirring, the viscosity will stabilize and the state will improve significantly. If you simply test the viscosity of the aqueous solution of cellulose, you can complete the aqueous solution on the first day, test the viscosity on the second day, and observe the state. Because there are many bubbles in the freshly prepared aqueous solution, the transparency and viscosity test indicators are not accurate due to their influence

Recommended Dosage

The recommended dosage of this product is 1-2.5‰ of the system, and the dosage needs to be determined by experiment

Packaging And Storage

After the product is opened and used, it must be sealed in time; This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration; Sealed and stored in a cool and dry place at 0-40ºC, and the storage time should not exceed 24 months.

Technical Support

During the preparation of various formula systems for this product, the Yida technical team can provide technical consultation, technical tracking, and long-term optimization of the formula system.

SK1000 is widely used in the production of lacquer, plays a good effect of thickening suspension.
 

System kind	The test content /‰	State description
Stone-like coating	1.5	Good spray, less sand fall

 

Adding Mode:
(1) Pre-dissolve in other containers beforehand. The specific steps are to weigh water, stir with electric drill, and slowly add hydroxyethyl cellulose until it is completely dissolved. Pour the predissolved cellulose solution directly into it in the formal production process.
(2) Sprinkle hydroxyethyl cellulose directly and slowly in the production process until it is completely dissolved
(3) half pre-dissolved, half sprinkled in the mass production process
     Either in the preparation of pre-solution or in the production process directly sprinkled with hydroxyethyl cellulose, do not pour all at once, can only use a vessel or hand slowly sprinkled, as far as possible to avoid cellulose agglomeration.
     In the production process without adding hydroxyethyl cellulose before adding multifunctional additives, otherwise cellulose is easy to agglomerate a knot.

Production Line

★Packages: PP bag with inner PE bag, Net Weight: 25 kgs
★Storage: After the product is opened and used, it must be sealed in time. This product is thermoplastic, so it should be stored in a high-temperature environment to avoid pressure. Otherwise, it will easily cause agglomeration. Sealed and stored in a cool and dry place at 0-40ºC, and the storage time should not exceed 24 months.
★Shipping: Shipping as non-danger goods.

Q: Are you manufacturer or trader?
A:We are a professional manufacturer of HEC , we have 13 years of production experience, you can buy assured products.

Q: what is your terms of payment?
A: TT is our prior option,LC and West Union can be accpetable also.

Q: What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q: How about your delivery time?
A: We can deliver the goods the next day at the soonest, and the latest will not be more than 9 days.
Such a fast delivery time depends on our strong production capacity, which is not affected by the environmental protection and the shutdown, so if you want to find a stable supply of goods to choose us is your right choice!

Q: Can you provide samples ?
A: The confirmation of samples is a necessary part of our cooperation, 
welcome you to ask for samples for us. We can provide samples to customers for free.

Q: Do you test all your goods before delivery?
A: Yes, we will carefully test the products before delivery, and we will also test the products for application test. It is our advantage to test the products for application test before delivery, which ensures that the products delivered are 100% qualified.