Two Ribs Deformed Bar Cold Rolling Machine
China Two Ribs Deformed Bar Cold Rolling Machine, Find details about China Two Ribs Deformed Bar Cold Rolling Machine, Two Ribs Deformed Bar Cold Rolling Mill from Two Ribs Deformed Bar Cold Rolling Machine
Basic Info.
Model NO.
THT3000
Automatic Grade
Fully Automatic
Customized
Available
Material
Wire Rods
Mill Roller Diameter
228mm-285mm
Product Cutting
Servo Cutting
Cutting Accuracy
High Accuracy Cutting
Warranty
2 Years
Speed
Fast Speed
Installation Support
Yes
Max. Rolling Speed
180m/Min
Trademark
HEYONLI
Transport Package
Loading in Container
Origin
China
HS Code
8455229090
Model NO.
THT3000
Automatic Grade
Fully Automatic
Customized
Available
Material
Wire Rods
Mill Roller Diameter
228mm-285mm
Product Cutting
Servo Cutting
Cutting Accuracy
High Accuracy Cutting
Warranty
2 Years
Speed
Fast Speed
Installation Support
Yes
Max. Rolling Speed
180m/Min
Trademark
HEYONLI
Transport Package
Loading in Container
Origin
China
HS Code
8455229090
Product Desciption
Two Ribs Deformed Bar Cold Rolling Machine
Brief Introduction
1. The equipment adopts PLC touch screen CNC system to make the operation easier and numerical control is higher.
2.This production line adopts the most advanced frequency and servo technology or independent property right of the
frequency conversion control technology, effectively protects the transmission systems and equipment from damage,
can prolong the service life of machinery and can save electricity 30-40%, linear velocity can reach 90-190 meters, improve
production efficiency by more than 40%.
3.We adopts the independent research and development of reducer for the national patent products, domestic fastest,
simplifies the structure of production line, make equipment more compact and reasonable. (eliminating the main speed
reducer and the main mill reducer, between reduced reducer for long transmission distance, connecting flange of different
heart problems). It can improve the transmission efficiency of more than 30%, to improve the stability of the equipment by
more than 60% and effectively improve the production efficiency of the equipment.
4.This equipment can be equipped with a super audio induction heating system, using the principle of spiral induction heating,
which makes the steel bar heated evenly, and the mechanical direction is stable, and the surface forms a blue protective layer
so that the steel bar is not corroded.
5.Multi- wheel synchronization control technology is used for straightening machine.
6.It is easily to operate with the independent development of variable frequency or servo flying shear control system. The CNC
degree is high, the failure rate is low, and the error is small.
Technical parameters:
Tungsten Carbide Roller
Delivery Photo
Finished Product
Welcome to send us inquiry to learn more information, thank you very much!
Brief Introduction
1. The equipment adopts PLC touch screen CNC system to make the operation easier and numerical control is higher.
2.This production line adopts the most advanced frequency and servo technology or independent property right of the
frequency conversion control technology, effectively protects the transmission systems and equipment from damage,
can prolong the service life of machinery and can save electricity 30-40%, linear velocity can reach 90-190 meters, improve
production efficiency by more than 40%.
3.We adopts the independent research and development of reducer for the national patent products, domestic fastest,
simplifies the structure of production line, make equipment more compact and reasonable. (eliminating the main speed
reducer and the main mill reducer, between reduced reducer for long transmission distance, connecting flange of different
heart problems). It can improve the transmission efficiency of more than 30%, to improve the stability of the equipment by
more than 60% and effectively improve the production efficiency of the equipment.
4.This equipment can be equipped with a super audio induction heating system, using the principle of spiral induction heating,
which makes the steel bar heated evenly, and the mechanical direction is stable, and the surface forms a blue protective layer
so that the steel bar is not corroded.
5.Multi- wheel synchronization control technology is used for straightening machine.
6.It is easily to operate with the independent development of variable frequency or servo flying shear control system. The CNC
degree is high, the failure rate is low, and the error is small.
Technical parameters:
| Two Ribs Cold Rolling Mill Production Line | |||
| Model | THT2000 | THT3000 | THT5000 |
| Control Tech. | Frequency conversion | Touch screen +PLC + encoder | Touch screen +PLC + encoder |
| Wire rod max dia. | Φ6-13.5mm | Φ6-14mm | Φ6-16mm/18mm |
| Finished products dia. | Φ5-12mm | Φ5-12.5mm | Φ6-14mm/16mm |
| Max speed | 120m/min | 150m/min | 190m/min |
| Wire rod length | 3-12m | 1-12m | 1-12m |
| Rack length | 12m | 24m | 28m |
| Material blanking way (optional) | Single side automatic blanking. | Automatic neat | Automatic neat |
| Collecting way (optional) | Spooler | Double entry line collecting . (no machine closing down and recounting) | Double entry line collecting . (no machine closing down and recounting) |
| Collecting weight | 1T | 2T | 2.8T |
| Speed adjusting way | Frequency conversion | CNC | CNC |
| Error of cutting(optional) | ±5mm | ±5mm | ±5mm |
| Cutting way | Frequency conversion flying shear | Servo flying shear | Servo flying shear |
| Main motor power | 55-75kw | 90-110kw | 180-220kw |
| Heating power(optional) | 400kw | 800kw | 1000-1200kw |
| Main power(optional) | 455-475kw | 690-710kw | 1130-1360kw/1450KW |
| Order machine | NO | YES | YES |
| The number of rolling | 2+1 | 2+1 | 2+1 |
| Straighten way | Online | Online | Online |
| Mill adjustment way | Synchronous motor pressed down | Synchronous motor pressed down | Synchronous motor pressed down |
| Speed reducer | Patented product | Patented product | Patented product |
| Drive way | Patented product | Patented product | Patented product |
| Main mill construction | Patented product | Patented product | Patented product |
| Number of operation staff | 1-2 | 1-2 | 1-2 |
| Installation length | 40*4 | 60*5 | 90*5 |
Tungsten Carbide Roller
Delivery Photo
Finished Product
Welcome to send us inquiry to learn more information, thank you very much!
You Might Also Like
Best Selling 50kg High Quality Electronic Digital Hanging Ha......
Fuller Auxiliary Box High / Low Gear Synchronizer (A-5056) H......
Hydroponic Farm Fertilizer Tank pH/Ec Monitor Automatic Digi......
Industrial Motorized Electric Actuated Ball Valve Manufactur......
Halal and Kosher Cert No Shell Walnut Light Halves Walnut
Garlic Flavor Fried Fava Bean Chips with Brc
Block Making Machine Qt8- 15D Concrete Molds Block Brick Mac......
HS Code Heavy Duty ISO 17712 High Security Bolt Seal
Pen Drive 16GB OEM Nylon Rope USB Drives Lanyard Custom USB ......
LED Concert Scene Background LED Display Screen
330ml 500ml 1.5L Pet Water Bottle Blowing Making Machine
Buttons Laser Marking Machine (DW- F10W )