Products

Standard Spiral Wound Gasket Cg Cgi R Rir etc

China Standard Spiral Wound Gasket Cg Cgi R Rir etc, Find details about China Spiral, Wound from Standard Spiral Wound Gasket Cg Cgi R Rir etc

Model NO.
SUNWELL-SW600
OEM
Yes
Characteristic
Dnv ISO9001,SGS
Trademark
SUNWELL
Transport Package
Wooden Box
Specification
Standard Nonstandard according your request
Origin
China
Model NO.
SUNWELL-SW600
OEM
Yes
Characteristic
Dnv ISO9001,SGS
Trademark
SUNWELL
Transport Package
Wooden Box
Specification
Standard Nonstandard according your request
Origin
China
Standard Spiral Wound Gasket
 
  
SUNWELL-SW600

>Products are manufactured in accordance with all relevant gasket standards.
>All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
>Our production capacity is 150,000 pcs per month.
>Material combinations for all operating conditions. 
 
Specification:
Description
SUNWELL SW600 spiral wound gasket is formed of V-shaped Metallic strip and soft non-metallic filler. Support rings, inside and Outside the spiral, improve the gasket's handing, fitting and Versatility.
Depend on its excellent compression resilience, it is suitable for sealing spots where the alteration of temperature and pressure are frequent.
Types:
SW600-R Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
 
 
 
SW600-IR Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
 


 
SW600-CG Outer Ring Type

Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
 


 


SW600-CGI Inner & Outer Rings Type

A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
 

 
 Typical Applications
Pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc.
Petrochemical, chemical, mechanical manufacturer, power station, metallurgy, shipbuilding, medical and pharmaceutical unclear power station and navigation, etc.
Prime Features
> Gasket are made in a wide variety of sizes and shapes.
> Combinations of metal strip and filler are selected to suit the specific fluid media and operating conditions.
> Quick to install and remove
> Make gaskets suitable for high pipeline pressure on flat or raised flange faces.
> Temperatures from cryogenic up to 1000 °C
Specifications
> Products are manufactured in accordance with all relevant gasket standards to suit flange designations: ASME B 16.20, ASME B 16.5, BS1560, ASME B 16.47 A (B), BS EN 1092, DIN, JIS, and NF, etc.
> Color cord as ASME B 16.20 on request.
Marking & Stamping:

Coloring Guardlines for Spiral Wound Gaskets

Spiral Wound Gaskets Package Types
Between 1/2'' ~ 24'' gaskets are packaged by plastic clips each 10 pcs. 
Upto 24'' gaskets packaged by soft cotton tape each.
To ensure that clients receive the highest quality of spiral wound gaskets.

You Might Also Like