Products

Polypropylene Particle PP Korea Korea (Wuhan) Petrochemical K8009 Copolymer High Impact High Flow Battery Polypropylene

China Polypropylene Particle PP Korea Korea (Wuhan) Petrochemical K8009 Copolymer High Impact High Flow Battery Polypropylene, Find details about China PP, Polypropylene from Polypropylene Particle PP Korea Korea (Wuhan) Petrochemical K8009 Copolymer High Impact High Flow Battery Polypropylene

Model NO.
K8009
Model NO.
K8009

 

TAIRIPRO K8009

Impact-resistant copolymer polypropylene

 

Formosa Plastics Corporation

product manual:

FCFC PP resin K8009 meets the requirements of UL, FDA, RoHS and the certificates of environmental protection.
 
member profile
Company Name:
Contact:
company address:
 complete material
Additional features
   PDF physical document
[normal version]   [ version with member contact information]
   Find alternatives
   Yellow card information
   Add to Favorites
TAIRIPRO K8009 physical properties table
Basic Information 
Yellow card number
  • E162823-224741
characteristic
  • Impact copolymer
Institutional rating
  • EC 1907/2006 (REACH)
  • FDA 21 CFR 177.1520
RoHS compliance
  • RoHS compliance
UL file number
  • E162823
form
  • particle
processing method
  • Injection molding
Physical propertiesRated valueUnit systemtesting method
proportion0.900g/cm³ASTM D792
Melt flow rate (melt flow rate) (230°C/2.16 kg)9.0g/10 minASTM D1238
Shrinkage-Flow (23°C)1.4 to 1.8%Internal method
hardnessRated valueUnit systemtesting method
Rockwell hardness (R grade, 23°C)80 ASTM D785
Mechanical behaviorRated valueUnit systemtesting method
tensile strength (Yield, 23°C)22.6MPaASTM D638
Elongation (Break, 23°C)> 200%ASTM D638
Flexural modulus (23°C)1080MPaASTM D790A
Impact performanceRated valueUnit systemtesting method
Unnotched cantilever impact  ASTM D256
    -20°C, 3.18 mm73J/mASTM D256
    23°C, 3.18 mmNo break ASTM D256
Thermal performanceRated valueUnit systemtesting method
Thermal deformation temperature under load (0.45 MPa, unannealed, 6.35 mm)110°CASTM D648
FlammabilityRated value testing method
UL flame retardant rating (1.50 mm, All Colors)HB UL 94
injectionRated valueUnit system 
Mold temperature30.0 to 50.0°C 
Injection pressure2.94 to 5.88MPa 
Injection instructions
Screw Temp 180-230°C
Polypropylene Particle PP Korea Korea (Wuhan) Petrochemical K8009 Copolymer High Impact High Flow Battery PolypropylenePolypropylene Particle PP Korea Korea (Wuhan) Petrochemical K8009 Copolymer High Impact High Flow Battery Polypropylene
Polypropylene Particle PP Korea Korea (Wuhan) Petrochemical K8009 Copolymer High Impact High Flow Battery Polypropylene

You Might Also Like