China Bubble CPAP Treatment of Nasal-CPAP for Premature, Neonate, Infant to Children, Find details about China Hfnc, High Flow Oxygen from Bubble CPAP Treatment of Nasal-CPAP for Premature, Neonate, Infant to Children
Bubble CPAP Nasal continuous positive airway pressure
Advantages:
Bubble CPAP is a sort of special medical equipment for supporting of babies' breath which devised and manufactured based on the wide application of closed continuous NCPAP in department of pediatrics. It uses on the course of ventilation treatment of Nasal-CPAP for premature, neonate, infant to children below 14 year old. The mode of CPAP can reduce babies' WOB effectively, while keeping the autonomous respiration well.
Superiority:
Supply a safe and controllable FIO2;
Keep the FRC effectively;
Reduce infant's WOB;
Reduce the need of invasive mechanical ventilation;
Supply better warm and humid gas;
Reduce the occurrence rate of the CLD;
Improve the physical sighs, such as height, weight.
Matching solution of Medical Air Compressor:
Max exhausting pressure: 0.7MPa
Output pressure: 0.20MPa~0.30MPa
Flow: >25L/ruin
Noise: <52dB(A)
Performance parameter:
FIO2: 21%~100%
Flow: 0~18LPM
CPAP pressure: 0.3~1.0kPa(3~10cmH2O)
Water capacity of Generator: 500ml or more
Alarm:the differential pressure> 0.1MPa, sound alarm
Common parameter:
Pressure of oxygen and air: 0.3MPa~0.4MPa
Power: 220V AC 50Hz
Parts:
Matching with Medical Electric Respiratory humidifier(PN-2000F/FA)
Working temperature: 30ºC~37ºC
Max temperature of heating plate: 85ºC
Capacity of Chamber:280ml(F-Adult); 230ml(FA-Infant)
Max flow: 180L/min
Max working pressure: 2kPa
CPAP Generator:
1. It is easy to set the oscillating gas pressure from 3cmH2O to 10cmH2O through adjusting the CPAP pressure bar.
2. The automatic regulating mechanism of water-level ensure the constant CPAP pressure.
3. The dismountable chamber is very convenient.
>PN-2000FB humidifier
»temperature | Mode with Heated wire: 25ºC~39ºC | »Max-temp of heating appliance | <85ºC |
Mode without heated wire: 23ºC~37ºC | »thermal cutoff of heating plate | 120±5ºC | |
»maximum water capacity | 230mL | »operating ambient temperature | 18ºC~26ºC |
»working pressure | ≤2kPa | »display window flashing | patient distal temperature>40ºC |
»flow | 180L/min | »H | patient distal temperature≥50ºC |
»drop of pressure | <300Pa | »L | patient distal temperature≤10ºC |
»power supply | 220VAC 50Hz | »ER2 | heating plate sensor failure or off |
»power consumption | 150W | »ER3 | heating plate sensor failure or off |
»volume | 135mm*145mm*155mm | »weight | 3.2kg |