Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable

China Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable, Find details about China Copper Housing Lm35 Digital Temperature Sensor, Copper Housing Lm35 Temperature Sensor Probe from Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable

Measuring Medium
Temperature
IP Rating
IP65
Certification
RoHS
Customized
Customized
Connector
AMP 7706
Length
1m, 1.5m, 2m, 5m, etc
Probe
Copper Housing
Cable
PTFE Cable
Pin Definition
Vcc, Gnd, Dq
Type
Waterproof
Operating Temperature
-55~+150ºC
Accuracy
±0.5°c
Power Supply
4V ~ 30V
Trademark
Senstech
Transport Package
PE Bag, Paper Carton
Specification
LM35
Origin
Guangdong, China
Measuring Medium
Temperature
IP Rating
IP65
Certification
RoHS
Customized
Customized
Connector
AMP 7706
Length
1m, 1.5m, 2m, 5m, etc
Probe
Copper Housing
Cable
PTFE Cable
Pin Definition
Vcc, Gnd, Dq
Type
Waterproof
Operating Temperature
-55~+150ºC
Accuracy
±0.5°c
Power Supply
4V ~ 30V
Trademark
Senstech
Transport Package
PE Bag, Paper Carton
Specification
LM35
Origin
Guangdong, China

Copper housing LM35 Digital temperature Sensor Probe with PTFE Cable
Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable

More Specifications

ProbeBrass housing, Copper housing, Stainless steel tube, Copper tube with clip, can customized
CablePTFE cable,  Silicone cable, TPE cable. can customized
ConnectorAMP 7706, PH, XH, SM, or another
Length85cm, 1m, 1.5m, 2m, 5m, customized

Main Features

Calibrated Directly in Celsius (Centigrade)
Linear + 10-mV/°C Scale Factor
0.5°C Ensured Accuracy (at 25°C)
Rated for Full −55°C to 150°C Range
Suitable for Remote Applications
Low-Cost Due to Wafer-Level Trimming
Operates from 4 V to 30 V
Less than 60-μA Current Drain
Low Self-Heating, 0.08°C in Still Air
Non-Linearity Only ±¼°C Typical
Low-Impedance Output, 0.1 Ω for 1-mA Load

Introduction

The LM35 temperature sensors are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device makes interfacing to readout or control circuitry especially easy. The device is used with single power supplies, or with plus and minus supplies. As the LM35 device draws only 60 μA from the supply, it has very low self-heating of less than 0.1°C in still air.

Recommend product
Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable
Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable

Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable
Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable

Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable
Copper Housing Lm35 Digital Temperature Sensor Probe with PTFE Cable