Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster

China Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster, Find details about China Cell Booster Network Repeaters, Cellular Range Extender from Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster

Model NO.
SHRC5824G2WP1
Item
2W 2.4&5.8GHz 33dB WiFi Signal Booster
Sku
0305sh200784
Operating Range
2.4~2.5 GHz, 5.0~5.875 GHz
Input Power
0~20 dBm
Transmit Gain
15-18dB
Output Power
2W (33dBm)
Receiver Gain
Less Than 12 dB
Supported Voltages
5V~16V/2A DC
Material
Cast Aluminum
Booster Weight
77g
Trademark
Sunhans
Transport Package
Carbon
Specification
9.7 x 5.2 x x1.1cm
Origin
China
Model NO.
SHRC5824G2WP1
Item
2W 2.4&5.8GHz 33dB WiFi Signal Booster
Sku
0305sh200784
Operating Range
2.4~2.5 GHz, 5.0~5.875 GHz
Input Power
0~20 dBm
Transmit Gain
15-18dB
Output Power
2W (33dBm)
Receiver Gain
Less Than 12 dB
Supported Voltages
5V~16V/2A DC
Material
Cast Aluminum
Booster Weight
77g
Trademark
Sunhans
Transport Package
Carbon
Specification
9.7 x 5.2 x x1.1cm
Origin
China
Sunhans Signal Range Extender 2W 2.4G & 5.8G Dual Band 33dBm WiFi Booster Repeater Amplifier for Drones
 

Product Description


Features:  

New design for simple,simple,simple
Excitingly small! Only 77g!
5-16V wide voltage range;support different power supply;

2.4G &5.8G dual band, Auto switch frequency;
Aluminum-alloy case by CNC, anti-interference;

Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment....
Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster

 

Detailed Photos


Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster

Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster
Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster


Product Parameters

Cell phone Amplifier Description: 2000mW 2.4Ghz & 5.8GHz 33dBm WiFi Signal Booster

SKU0305SH200784
ModelSHRC5824G2WP1
Operating Range2.4~2.5 GHz, 5.0~5.875 GHz
Operating ModeBi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switch receiving to transmitting mode
 
Input power0~20 dBm
Transmit gain15-18dB
Output Power2W (33dBm)
Receiver Gain≤ 12 dB
Noise Figure≤3.5 dB typical
Frequency Response±1dB over operating range
Connector typeSMA Receptacle 50ohm,To radio SMA female(hole inside),To antenna RP-SMA female(pin inside)
Power supply5V~16V/2A DC
Operating Temperature-20°C to + 70°C
Operating HumidityUp to 75% relative humidity
MaterialCast Aluminum
Booster Size9.7 x 5.2 x x1.1cm
Booster Weight77g

Installation Instructions

All specifications of PA can be customized based on customer requirement.
Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster

Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster
 The 5.8GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate. 

  SHRC58G2WP 5.8ghz 2w  33dBm  is  specially  designed for  UAV, drones, compatible perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT and Blade, also auitable for active speaker, router and so on. 
Features:
1. Easy Installation
2. Plug and play, no software setup.
3. 3.5dB ultra-low noise
4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.
5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied
6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.
Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.


3. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

Package contents:

2 x SH-RC5824G2W eSunRc WiFi booster
2 x RG141 SMA male to RP-SMA male
2 x DC 2.5" to USB adapter
2 x DC 2.5" to JST adapter
2 x Mounting Velcro
2 x User manual
2 x 2.4G/5.8G RC antenna

Company Profile

About us


Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster
Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster
Dual Band Wireless Amplifier Uav Bluetooth WiFi Signal Repeater 2000MW 2.4G+5g Booster

After Sales Service

   Our Service:                                                                                                                                                                                     

    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.