UCS Low Pressure Screw Compressor

China UCS Low Pressure Screw Compressor, Find details about China Screw Compressor, Centrifugal Compressor from UCS Low Pressure Screw Compressor

Model NO.
UC38-3C
Structure Type
Closed Type
Installation Type
Movable Type
Type
Single Screw Compressor
Save Energy
Environment-Friendly
Trademark
UCS
Transport Package
Standard Sea Freight
Specification
Stainless Steel Box
Origin
China, Japan
HS Code
8414809090
Model NO.
UC38-3C
Structure Type
Closed Type
Installation Type
Movable Type
Type
Single Screw Compressor
Save Energy
Environment-Friendly
Trademark
UCS
Transport Package
Standard Sea Freight
Specification
Stainless Steel Box
Origin
China, Japan
HS Code
8414809090
 
Product Description
Working PressureFree Air DeliveryWorking Power
2-4 bar494-2154 ((m³/min)37-220 (kw)
29-58 psig14-61 (cfm)50-295 (hp)


Advantages and Characteristics:

  • Can save more than 30% of the electricity;
  • The low-pressure air end can automatically adjust the internal compression ratio according to the service pressure and maintain the best energy efficiency within the exhaust pressure range of 2-5bar;
  • In many industries, such as chemical, glass, petroleum, textile, printing, dyeing, and ceramics, the required working pressure of compressed air is only 3-5bar. However, at present, these industries usually use 7-10bar air compressors coupling with a pressure reducing valve to achieve low pressure; it is undoubtedly a considerable waste of energy. For this reason, UCS has developed low-pressure screw air compressor which directly outputs the low-pressure compressed air required by these industries; the compressor uses less energy to meet the production requirement, and user's production cost will significantly improve.

Mechanical System

Self-Developed Special Air End

  • International leading molded lining, 4:6 tooth ratio, less tooth and more air suction;
  • Large rotor, low speed, and long life;
  • The inner oil circuit of the air end can precisely control the amount of oil injection, helping the lubrication and cooling reach the best performance;
  • SKF bearings adapted to the load changing, which is flexible, efficient, proven long durability, and it guarantees the life of the air end.
UCS Low Pressure Screw Compressor

Low Pressure Screw Air End Drive Chain

  • The high-efficient driving motor directly connected to the two-stage compression air end without coupling, the transmission chain is maintenance-free, reducing energy consumption by 1%;
  • IP55 fully closed motor and air end housing integrated, effectively prevents metal particles, dust, moisture and other pollutants infiltrating into the motor and air end, makes the compressor performance more stable;
  • The motor bearing uses strengthened cylinder + ball bearing, delivering higher strength and reliability;
  • The machining accuracy of transmission gear up to aviation level 6, multi-channel heat treatment and related processing technology ensure the superior surface hardness, ultra-high wear resistance and yield strength of all mechanical components;
  • Independent oil supply system and precise oil filtration effectively ensure the stability and reliability of the entire transmission under the long-time operation of full load.
 UCS Low Pressure Screw Compressor

Intake and Filtration Systems

Prefilter Protective Layer:

Prevent large particles of dust, cotton and other sundries from entering the air compressor. Keep the compressor internal clean. Strictly observe the first pass of compressed air.

High-Efficiency Particulate Air (HEPA) Filtration:

Heavy-duty air filtration system powered by Donaldson USA, with filtration accuracy up to 99.9% for particles greater than 3μm. Suitable for all kinds of heavy dust environments. 

Double Large Diameter Intake Assembly Design:

The pressure difference of all air path less than 0.2bar, greatly extending the service life of the air filtration system.

Optimized Design of Large Diameter Air Inlet Valve:

Low energy consumption in no-load operation, cast aluminium material, more stable performance.

The optimized mold design of the intake pipe:

High strength rubber sealing, firm and durable.

Oil Filter:

Donaldson oil filters, high grade of clean filtration, effectively protect the safe operation of the air end bearing, extend the service life of the air end.

Oil and Air Separation System:

Euro design efficient oil and air separation core, glass fibre filter material, long life, more efficient, no need for frequent replacement. The aggregate separation core and the oil return device work together, recover and recycle the lubricating oil effectively, avoiding oil over-spraying, and ensuring the oil content of the compressor exhaust 2ppm.

Lubricating Oil:

UCS lubricating oil has good oxidation resistance, high-temperature resistance, high flash point, excellent thermal conductivity and many other characteristics.

UCS Low Pressure Screw Compressor
Cooling System:
  • The design allowance of heat exchange is 20%-50%, which ensures the stable operation of the compressor in an extreme environment and minimize pressure drop.
  • Standard motor frequency conversion, accurate oil temperature control, further reduce air compressor energy consumption.

UCS Low Pressure Screw Compressor
Features of 
Permanent Magnet Synchronous Motor (PMSM)

  • The motor efficiency is as high as 96%, and the power factor is 0.98, far exceeding the level 1 energy efficiency standard;
  • Permanent magnet with high coerce and high-temperature resistance ensures no demagnetization at a high temperature of 180ºC;
  • Independent fan cooling , to ensure the motor safe running under long hours and low frequency;
  • F grade insulation, 70K temperature rise design, suits the high temperature working condition of air compressor ;
  • Fully enclosed IP55 protection projects the clean internal environment of the motor and extends the life of permanent magnet and insulation;
  • Built-in temperature protection protects winding insulation and permanent magnet.

Permanent Magnet Synchronous Motor Vs Ordinary Asynchronous Motor

High efficiency:


The excitation system loss eliminated, improving efficiency.

 

Keep high-efficient at low-load state:

The energy efficiency of the PMSM is more than 9% higher than the asynchronous motor and remains unchanged with the reduced frequency .

Large starting torque:

The maximum starting torque of the PMSM may up to 3 times higher than the rated torque , while the general asynchronous motor has 1.6 times only.

More stable control: 

The PMSM response time less than 50ms. The air production volume may be adjusted transiently within a broad range to stabilize air pressure precisely .


UCS Low Pressure Screw Compressor
UCS Low Pressure Screw Compressor

UCS Low Pressure Screw CompressorUCS Low Pressure Screw Compressor

 
Company Profile

UCS Low Pressure Screw Compressor
UNITED COMPRESSOR SYSTEM has a series of screw compressors with the power of 5.5~630kW, FAD of 0.69~120m3/min and pressure range of 0.2~1.5MPa. At UCS, we also provide services such as design, manufacturing, training operation of the air compression station, technological improvement of energy-saving and customized types. The idea of wholeheartedly customer serving makes our pace steady and long.

To save space and install pipelines, the series of intelligent all-in-one screw compressor produced by UCS integrates compressor, air storage tank, refrigerated dryer and filter into one unit, which is equivalent to a miniature air compressor station. The machine popularly used in dentistry, hyperbaric oxygen chamber, laboratory, electronics, semiconductor, winery, beverage, food packaging, laser cutting, and other industries were requiring pure air and small-scale air supply.


Quality Assurance

In 2003, UCS Compressor accredited with ISO9001 Quality Management System and ISO14001 Environmental Management System Certificates. The company strictly follows the quality requirement of Crosby's "doing it right the first time", persists in the working standard of "zero defect", regards the "It is immoral to produce a defective product" as the criteria of measuring the quality. UCS devotes itself to the continuous improvement of products all the time.
 

Packing & Shipping
UCS Low Pressure Screw Compressor

UCS Low Pressure Screw CompressorUCS Low Pressure Screw Compressor
 

FAQ

1. Q: How about our after-sales service?

A: Emails or calls for feedbacks in 2 months interval.

2. Q:What trade terms do we provide?

A: Trade term :CIF ,CFR ,FOB,Ex-Works .  

3. Q: What kind of settlement currency do we offer?

A: We do any kind of currency such as US dollar, euro, RMB, etc.

4. Q: 
How long is the delivery time of our product?

A: Our standard delivery time is 30 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.

5. Q: 
How to install our compressor?

A: Installation guidance and on-site commissioning provided by trained technicians or local authorised service crew.

6. Q: What's the Min. Order requirement ? 

A: Our Min. Order quantity is 1pc.


 

Contact us :

Company Name : United Compressor System (Suzhou) Co.,Ltd.

Contact Preson : Junyao (Clare) Feng 


If you are interested in our products, please feel free to contact us.We sincerely look forward to cooperating with you to grow and develop together.