2 Axis Brushless Gimbal Controller Board BGC 3.1 MOS BGC2.2 Firmware BGC30P for 7.4-16.8V 2204 2805 Gimbal Motor for Stabilizer

Description:

The use of MOS tube instead of L6234D drive motor, the peak current 10A (L6234D peak 5A), can work long hours in the 5A (recommended heat sink)

Gimbal voltage 7.4-16.8V , 3S power supply

Smallest sensor board, lighter, more compact

Gives the parameter to adjust the software, facilitates your own customization

Specification:

Product Name: BGC 3.1 high current 2-axis gimbal control board

Manufacturers No.: BGC30P

Product appearance: 5 x 5cm

Drive: MOS

Maximum operating current: 10A

Continuous operating current: 5A

Plug type: JST / HX

Hardware version: BGC3.1

Firmware version: BGC2.2

Supports motor: 2x - 8x series ( for GoPro to RED digital cinema camera )

Net weight: 15g (with sensor and cable)

Package Included:

1 x Gimbal control board

1 x Sensor

1 x Connecting cable

Super Light Gopro CNC Brushless 2 Axis Camera Gimbal W/Motors & Controller 160G For DJI Phantom

1: Simple structure and Super light weight(with motors only 163g),CNC aluminum alloy structure

2: Brushless motor direct drive

3: With anti-vibration rubber balls,easy to adjust

4: Compatible with Gopro 3,4

5: With 2pcs 2208 motors and BGC 3.0 gimbal controller,sensor(The software is BGC 2.2)

Specification:

Voltage: 12V(3S lipo battery)

Current: 150mA

Color: Silver

Net weight: 163g

Gross weight: 293g

This is RTF version,you only need connect the battery on the plug,then it can work directly.

We have adjusted the parameters for GOPRO camera,please don't upgrade the firmware,otherwise,the parameters will lost,and the gimbal did not work.

2 Axis Brushless Gimbal Frame 2208 Motors BGC Flight Controller for Gopro 3 4 Xiaomi Xiaoyi SJ4000 Camera FPV RTF DIY Drone

Featuers:

Simple structure and light weight,CNC aluminum alloy structure

Brushless motor direct drive

With anti-vibration rubber balls,easy to adjust

Compatible with Gopro 4 , 3; sj4000 ; xiaomi xiaoyi camera

with 2pcs 2208 motors and BGC gimbal controller,sensor

with motor protector which can help heat dissipation

203g without Camera

Package include:

1 x Aluminum gimbal installed 2 motors

1 x Gimbal controller

1 x Sensor Wiring

1 x belt for camera

2 x servo cables

Question 1:

Why the gimbal shaking so much after power supply?

1:When receive the gimbal, first install the camera, then supply the power, otherwise the gimbal will shake if not install the camera.  

2:The gimal can only load the camera, becausethe gimbal has requirement to the weight, if equipped with a light camera , it will also shake, because it is too light.

3: If the cable bind the gimbal , the motor will also shake, pls let the cable far away from the gimbal.  

Question 2:

The Gimal cannot work after supply the power?

1: pls insert the sensor again, the sensor may be loose during transportation. Just INSERT once again

Question 3:

Why the gimbal board burned?

1: the current is too large, the breakdown of the IC module,pls use batteriy of low Amperage.

Question 4:

What voltages can be used of the gimbal?

1:we proposed using 12V(3S battery)

Note : (very important )   

1. the camera must fixed in the head (without any loosening )     

2 Adjust the camera to the left or right so that the camra is at Horiziontal Level  

3 Before camera fixed in the gimbal , please do not supply power to the board

4 .the parameters on the gimbal is for gopro , sj4000 or xiaoyi camera , if you use other camera , it may not fit or you may need to change the parameters .