SR2807 DIGITAL COATING THICKNESS GAUGE
( F & NF type)
FEATURES
* It meets the standards of both ISO2178 and ISO-2360 as well as DIN, ASTM and BS. Suitable for the laboratory and for use in harsh field conditions.
* The F probes measure the thickness of non-magnetic materials (e. G. Paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc. ) on magnetic materials (e. G. Iron, nickle etc. ). Often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.
* The N probes measure the thickness of non-magnetic coatings on nonmagnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. Applied to aluminum, brass, non-magnetic stainless steel, etc.
* Automatic substrate recognition.
* Manual or automatic shut down.
* Two measurement mode: Single and Continuous
* Wide measuring range and high resolution.
* Metric/Imperial conversion.
* Digital display gives exact reading with no guessing or errors.
* Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface.
SPECIFICATIONS
Display: 4 digits, 10 mm LCD
Range: 0~1250 um/0~50mil (other range may be specified)
Resolution: 0.1 um (0~99.9um), 1 um (over 100um)
Accuracy: ± 1~5%n or 3.5 um or 0.1mil (Whichever is the greater)
PC interface: With RS-232C interface
Power supply: 2x1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50° C, Humidity <80%
Size: 102x35x23 mm (4.0x1.4x0.9 inch)
Weight: About 40 g (in-built probes) (not including batteries)
Accessories:
Carrying case...1 pc.
Operation manual...1 pc.
F probe...1 pc.
N probe...1 pc.
Calibration foils...1set
Substrate (Iron)...1 pc.
Substrate (Aluminium)...1 pc.
Optional accessories
Cable & software for RS232C

SR2808 DIGITAL COATING THICKNESS GAUGE
( F & NF type)
FEATURES
* It meets the standards of both ISO2178 and ISO-2360 as well as DIN, ASTM and BS. Suitable for the laboratory and for use in harsh field conditions.
* The F probes measure the thickness of non-magnetic materials (e. G. Paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc. ) on magnetic materials (e. G. Iron, nickle etc. ). Often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.
* The N probes measure the thickness of non-magnetic coatings on nonmagnetic
Metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. Applied to aluminum, brass, non-magnetic stainless steel, etc.
* Automatic substrate recognition.
* Manual or automatic shut down.
* Two measurement mode: Single and Continuous
* Wide measuring range and high resolution.
* Metric/Imperial conversion.
* Digital display gives exact reading with no guessing or errors.
* Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface.
SPECIFICATIONS
Display: 4 digits, 10 mm LCD
Range: 0~1250 um/0~50mil (other range may be specified)
Resolution: 0.1 um (0~99.9um), 1 um (over 100um)
Accuracy: ± 1~5%n or 3.5 um or 0.1mil (Whichever is the greater)
PC interface: With RS-232C interface
Power supply: 2x1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50° C, Humidity <80%
Size: 102x35x23 mm (4.0x1.4x0.9 inch)
Weight: About 40 g (in-built probes) (not including batteries)
Accessories:
Carrying case...1 pc.
Operation manual...1 pc.
F probe...1 pc.
N probe...1 pc.
Calibration foils...1set
Substrate (Iron)...1 pc.
Substrate (Aluminium)...1 pc.
Optional accessories
Cable & software for RS232C