Products

Horizontal Blast Hole Drilling Machine Work with Air Compressor

China Horizontal Blast Hole Drilling Machine Work with Air Compressor, Find details about China Blast Hole Drilling Machine, Horizontal Drilling Machine from Horizontal Blast Hole Drilling Machine Work with Air Compressor

Model NO.
DFD-150G
Application
Hard Rock
Drilling Depth
100m
Drilling Caliber
105~254mm
Walk Speed
2km/H
Power
56kw
Usage
Hard Rock Drill, Water Well
Power Type
Diesel or Gasoline
Trademark
DEFY
Transport Package
Standard Container
Specification
5750× 2100× 2450mm
Origin
Henan, China
Model NO.
DFD-150G
Application
Hard Rock
Drilling Depth
100m
Drilling Caliber
105~254mm
Walk Speed
2km/H
Power
56kw
Usage
Hard Rock Drill, Water Well
Power Type
Diesel or Gasoline
Trademark
DEFY
Transport Package
Standard Container
Specification
5750× 2100× 2450mm
Origin
Henan, China
horizontal blast hole drilling machine work with air compressor
Introduction
DFD-150G horizontal blast hole drilling machine takes advantages of low power consumption, high efficiency, easily to transport and excellent performance in outside work. The advanced hydraulic system drives the drilling rig. The air is only consumed by DTH hammer, which saves the cost of the air compressor. Rotary system adopts new type duplex-motor to drive, provides powerful strength in drilling large diameter hole. Suspension chassis makes the machine more flexible, easier to climb, especially suit the rough site working.
This machine widely apply to mine exploit, irrigation, power station, building road, pile foundation project hole drilling and other hard rocks drilling work.

1. Max 100m depth. diameter range: 105~254mm.
2. DFD-150G pole drilling machine is high efficiency when drilling very hard rock.
3. Drill tower angle can be adjustable, can suitable different drilling situation.


Parameter:
Technical Parameter
Weight(Kg)7200
Dimension(mm)5750×2100×2450
Drilling Caliber(mm)105~254
Drilling Depth(m)100
Walk Speed(Km/h)2.5
Climbing Capacity(°)30
Ground Clearance(mm)380
Working Pressure(MPa)1.05~2.46
Air Consumption(m³/min)10~25
Once promotion distance(mm)3000
Skid Compensate Length(mm)1200
Skid Up and Down(°)Total 100
Skid Left and Right(°)Total 100
Drill Arm Left and Right(°)Total 90
Drill Arm Up and Down(°)Total 120
Speed of Spindle(r/min)0-120
Rotary Torque(N.M)3600
Power(Kw)56
Applicable Hardness(f)6~20


Contact Info:  Debbie Liu
Mobile +86-13213019085 
 
 

You Might Also Like