Products

Fiber Optic Patch Cord Accessories Single Mode Single Core Connector LC/APC

China Fiber Optic Patch Cord Accessories Single Mode Single Core Connector LC/APC, Find details about China Fiber Optic Patch Cord, Single Mode Single Core from Fiber Optic Patch Cord Accessories Single Mode Single Core Connector LC/APC

Model NO.
Single mode single core connector LC/APC
Application
a Device for Detachable (Active) Connections Betwe
Light Source TYPE
Other
Connector Type
LC/Upc
Brand
Fcj Opto Tech
Pin Body Outer Diameter
2.2490±0.0003m
Coaxial Tolerance of Fiber Core and Pin
Less Than 0.3µm
Angle Tolerance Between Fiber and Pin Bo
Less Than 0.2
Pin Body Convex Spherical Degree of Offs
Less Than 30um
Trademark
FCJ OPTO TECH
Transport Package
1PCS/Bag
Specification
3 x 2.0 mm
Origin
China
HS Code
85367000
Model NO.
Single mode single core connector LC/APC
Application
a Device for Detachable (Active) Connections Betwe
Light Source TYPE
Other
Connector Type
LC/Upc
Brand
Fcj Opto Tech
Pin Body Outer Diameter
2.2490±0.0003m
Coaxial Tolerance of Fiber Core and Pin
Less Than 0.3µm
Angle Tolerance Between Fiber and Pin Bo
Less Than 0.2
Pin Body Convex Spherical Degree of Offs
Less Than 30um
Trademark
FCJ OPTO TECH
Transport Package
1PCS/Bag
Specification
3 x 2.0 mm
Origin
China
HS Code
85367000
Fiber optic patch cord accessories
General overview:
Fiber optic patch cords, defined by the International Telecommunications Union (ITU) as "passive components for stable, but not permanent, connection of two or more fibers" (CCITT Study Group VI was adopted in Geneva in March 1922).It is a device for detachable (active) connections between fiber and fiber.It precisely pairs the two end faces of the fiber to maximize the coupling of the optical energy output from the transmitting fiber to the receiving fiber and minimizes the impact on the system due to its involvement in the optical link.Optical fiber active connectors can be divided into common single-mode and multi-mode connectors of silicon-based fibers according to different transmission media, and other fiber-optic connectors such as plastics. According to the connection structure, it can be divided into various forms such as FC, SC, ST/LC/MTRJ/MPO/MU/SMA/FDDI/E2 000/DIN4/D4.

Technical Parameters:
itemTechnical Parameters
Applicable optical cable3 x 2.0 mm drop cable
Plug typeSC/LC/FC
Fiber diameter125μm
Fiber modeSM
Insertion loss≤0.5dB
Return loss≥ 50(UPC );≥55(APC )
Tensile strength>40N
Operating temperature-40ºC~+70ºC
High and low temperature cycleΔIL≤0.3 dB,ΔRL≤5 dB
Drop test ΔIL≤0.3 dB,
Bare fiber fastening force>5N
Mechanical durability (500 times)ΔIL≤0.3 dB

Single mode single core connector LC/APC:
The LC connector is a plug-in connector that consists of a small single-pin plug and adapter.It features a rectangular structure and an elastic clip locking mechanism, including a coupling pin and a pin that is elastic in the direction of the optical axis.The typical outer diameter of the pin is nominally 1.25 mm; the plug has a plug-in switch that can be used as a limit for positioning and the relative position between the connector and the mating component.The light centering device of the connector is a rigid inner bore or an elastomeric sleeve.

The pigtail uses a single-mode fiber optic connector called the LC-type single-mode fiber optic connector, and the pigtail uses a multimode fiber optic connector called the LC-type multimode fiber optic connector.

The standard connector is a precision manufactured or selected connector that includes a standard plug and a standard adapter for use as a reference for measuring the optical performance of the connector, so it has higher dimensional tolerance requirements.

The standard plug has the same interface device as the general plug interface, mainly because the pin body of the plug has higher precision, and its requirements are as follows:
·Pin body outer diameter: 1.2490±0.0003mm;
·Coaxial tolerance of Fiber core and pin body: <0.3µm;
·Angle tolerance between fiber and pin body: <0.2°;
·Pin body convex spherical degree of offset vertices: <30µm;

Optical performance specifications allowed for LC type single mode connector plug:
·Insertion loss of either plug through standard adapter and standard plug≤0.35dB(Repeatability);Return loss>4OdB (LC/ PC), >60dB (LC/APC).
·Insertion loss of any two plugs connected≤0.5dB;Return loss>35dB (LC/PC); >58dB (LC/APC).
·LC type adapter or socket allows loss relative to two standard plugs<0.2dB (Single mode), <0.ldB (Multimode).
·The operating temperature of the LC optical connector is: -25ºC~+70ºC
 

You Might Also Like