Products

CATV Indoor Optical Node Receiver Wdm

China CATV Indoor Optical Node Receiver Wdm, Find details about China Receiver, TV Receiver from CATV Indoor Optical Node Receiver Wdm

Model NO.
HH-FNB-1G-SWDM
Frequency Range
45~860/1003
Trademark
HAIHUI
Transport Package
Carton
Origin
China
HS Code
8517629900
Model NO.
HH-FNB-1G-SWDM
Frequency Range
45~860/1003
Trademark
HAIHUI
Transport Package
Carton
Origin
China
HS Code
8517629900
HH-FNB-1G-SWDM Indoor Optical Receiver
1. Product Summary
HH-FNB-1G-SWDM optical reveiver is the latest 1GHz FTTB optical reveiver. With wide range reveiving optical power, high output level and low power consumption. It is the ideal equipment to build the high-performance NGBnetwork with WDM.

2. Performance Characteristics
  • Excellent optical AGC control technique, when the input optical power range is -9~+2dBm, the output level, CTB and CSO basically unchanged;
  • Downlink working frequency extended to 1GHz, RF amplifier part adopts the high performance low power consumption GaAs chip, the highest output level up to 112dBuv;
  • EQ and ATT both use the professional electric control circuit, makes the control more accurate, operation more convenient;
  • Built-in the national standard II class network management responder, support remote network management (optional);
  • Compact structure, convenient installation, is the first choice equipment of FTTB CATV network;
  • Built-in high reliability low power consumption power supply, and selectable external power supply;


3. Technique Parameter
ItemUnitTechnical Parameters
Optical  Parameters
Receiving Optical PowerdBm-9 ~ +2
Optical Return LossdB>45
Optical Receiving Wavelengthnm1100 ~ 1600
Optical Connector Type SC/APC or specified by the user
Fiber Type Single mode
Link  Parameters
C/NdB≥ 51Note 1
C/CTBdB≥ 60
C/CSOdB≥ 60
RF  Parameters
Frequency Range

MHz

45 ~860/1003
Flatness in BanddB±0.75
  (FZ110 output)(FP204 output)
Rated Output LeveldBμV≥ 105≥ 101
Max Output LeveldBμV≥ 108 (-9 ~ +2dBm Optical power receiving)≥ 104 (-9 ~ +2dBm Optical power receiving)
≥ 112 (-7 ~ +2dBm Optical power receiving)≥ 108 (-7 ~ +2dBm Optical power receiving)
Output Return LossdB≥16
Output ImpedanceΩ75
Optical AGC RangedBm(-9dBm/-8dBm/-7dBm/-6dBm/-5dBm/-4dBm)-(+2dBm) adjustable
Electrical control EQ rangedB0~15
Electrical control ATT rangedBμV0~15
General Characteristics
Power Voltage

V

A: AC (150~265)VD: DC 12V/1A External power supply
Operating TemperatureºC-40~60
ConsumptionVA≤ 8
Dimension mm 210(L)* 110(W)* 47(H)
     
Note 1: Configure 59 PAL-D analog channel signals at the 550MHz frequency range. Transmit digital signal at the frequency range of 550MHz~862MHz. The digital signal level (in 8 MHz bandwidth) is 10dB lower than analog signal carrier level. When the input optical power of the optical receiver is -1dBm, the output level: 108dBμV, EQ: 8dB.


4. Block Diagram
CATV Indoor Optical Node Receiver Wdm
with II class network management responder, FP204 (two-way splitter) output block diagram

5. Relation Table of Input Optical Power and CNR
CATV Indoor Optical Node Receiver Wdm

6. Function Display and Operating Instruction
Mode: Mode selection button, total eight modes. Press the mode selection button to enter the corresponding status display, eight modes to cycle.
The following is the detailed instructions:

CATV Indoor Optical Node Receiver Wdm
 

You Might Also Like