Manufacturers of Hollow Fiber Ultrafiltration Membranes Used in Water Treatment Plants UF4040 (PP)
China Manufacturers of Hollow Fiber Ultrafiltration Membranes Used in Water Treatment Plants UF4040 (PP), Find details about China Pan PVDF, Hollow Fiber from Manufacturers of Hollow Fiber Ultrafiltration Membranes Used in Water Treatment Plants UF4040 (PP)
Basic Info.
Model NO.
UF4040(PP)
Brand
Frotec or Customized
Trademark
FROTEC
Transport Package
Carton
Specification
UF4040(PP)
Origin
China
HS Code
8421999090
Model NO.
UF4040(PP)
Brand
Frotec or Customized
Trademark
FROTEC
Transport Package
Carton
Specification
UF4040(PP)
Origin
China
HS Code
8421999090
Product Desciption
Hollow Fiber Membrane UF Module
1. Tech Data of Membrane Materials
Type: UF4040(PP)
4. Reference
No
Notice
1 If the membrane have be treated with hydrophilic property in dry condition, there will be
activated-agent on the membrane. Please clean the membrane by water to remove the
possible chemical agent for 30mins. The activated agent is harmless for health.
2 If the membrane have be treated with hydrophilic property in wet condition, there will
be protective water in the module. Maybe disinfection Chemical agent will be used.
Please clean the membrane by water to remove the possible chemicals for 10 mins.
3 The PP membrane have excellent properties to resist the chemicals of acid, alkaline
(HCl or NaOH) and others, but not strong enough in high concentration oxidiztive
chemicals (NaClO). Please do not keep the membren in such chemical for long time.
4 During the cross-flow and filtration, the bigger flowrate can increase the filtration and
resist the fouling of the membrane.
5 The temperature will greatly influence the UF filtration, the effluent rate will be
decreased with the lower temperature.
6 During the chemical washing, you can submerged the membren in the chemicals or
cycle the chemicals in the module for hours.
7 After the membrane has been used, please keep the membrane in wet condition all the
time. If the membrane become dry, the filtration ability will be lost.
6. Connection mode of the UF module
The UF module is outside-to-inside filtration one. There will be an "arrow" stick in the casing
of modules. On the counter side of the arrow direction, it is feed-in port. On the arrow direction,
the center port is "concentration" port, and the side port is "clean water" out port.
Hear we list two flushing ways:
The simple flushing: The flushing water will be pumped from "concentration" out port to
"feed-in" port. The effluent rate can be recovered slightly maybe.
The back-flushing: The flushing water will be pumped from the "clean water" out-port to the
"fedd-in" port. The effluent rate can be recovered greatly.But the flushing water must be clean
water or UF water.
The UF modules can be installed in horizontal direction or vertical direction.
Two or more UF modules can be used together to get more capacity of filtration. If the flushing
and air/water flushing can be done automatically, the UF modules can be keep a better filtration
for a long time.
FROTEC ULTRA FILTRATION MEMBRANE
Ultra-filtration is an advanced technology to separate, purify and concentrate substance . It presents hollow capillary tube shape or hollow fiber shape, micro-pore covers tube wall densely. Feed liquid is flowing in or out the membrane under the influence of pressure, dissolvent or small molecule can permeate membrane and become pure liquid by collection, while large molecule (such as protein, each kind of enzyme, nucleic acid, polysaccharide and so on) ,colloid particle (such as emulsion, micro-ion) and bacterium are cut off by the membrane and are taken off by the circulating liquid flow to become concentrating liquid.
FROTEC ULTRA FILTRATION MEMBRANE 4040
| Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) |
| UF-4040 | UF-4040 | 101 | 19 | 27 | 1016 |
FROTEC ULTRA FILTRATION MEMBRANE 4046
| Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
| UF-4046 | UF-4046 | 169 | 113 | 112.5 | 965 | 1155 |
FROTEC ULTRA FILTRATION MEMBRANE 6060
| Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
| UF-6060 | UF-6060 | 195 | 160 | 160 | 1132 | 1352 |
FROTEC ULTRA FILTRATION MEMBRANE 8060
| Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
| UF-8060 | UF-8060 | 320 | 237 | 183.5 | 1020 | 1415 |
| Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
| UF-1060 | UF-1060 | 323 | 303 | 173 | 1600 | 1713 |
Ultrafiltration membrane module parameters
| Module | UF-4040 | UF-4046 | UF-6060 | UF-8060 | UF-1060 |
| Module type | Inside-out | Inside-out | Inside-out | Inside-out | Inside-out |
| Shell and seal materials | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins |
| Membrane Material | PAN/PVC | PAN/PVC | PAN/PVC | PAN/PVC | PAN/PVC |
| Molecular Weight Cut off(Dalton) | 50.000 | 50.000 | 100.000 | 100.000 | 100.000 |
| Size (mm) | Ø90×1016 | Ø90×1155 | Ø160×1352 | Ø200×1415 | Ø250×1713 |
| Effective membrane area | 4m2 | 4.8m2 | 15m2 | 25m2 | 52m2 |
| Hollow fiber id/od size | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm |
| Max operating pressure | 0.3Mpa | 0.3Mpa | 0.3Mpa | 0.3Mpa | 0.3Mpa |
| Suggest operating pressure | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa |
| Max transmembrane pressure | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa |
| Backwash pressure | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa |
| Produced water pollution index( SDI 25) | <3 | <3 | <1 | <3 | <3 |
| Initial flux | 0.8m3/h | 1.0m3/h | 4.5m3/h | 5m3/h | 9m3/h |
| Design flux | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h |
| Operating mode | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow |
| Bacteria removal rate | >4log | >4log | >6log | >6log | >6log |
| Permeate turbidity | <0.1NTU | <0.1NTU | <0.1NTU | <0.1NTU | <0.1NTU |
| Operating temperature | 5~40ºC | 5~40ºC | 5~40ºC | 5~40ºC | 5~40ºC |
| PH range | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 |
FROTEC ULTRA FILTRATION MEMBRANE 2860 2880
UF2860 UF 2880 are an Ultra Filtration membrane module made by PVDF material hollow fiber tubes, and cover is PVC shell. These UF membranes are characterized by Antibacterial function.(especially good for removing particulate, virus, colloid, albumin protein, gelatin, carbon black, organic compound.......)
UF2880 | Filtration Type | Outside-In |
| Max. Working Pressure (@ 20ºC) | 94 psi (0.62MPa / 6.25bar) | |
| Suggested Working Pressure | 43 psi (0.3MPa / 3bar) | |
| Backwash pressure(suggested) | 36 psi (0.25Mpa /2.5bar ) | |
| Air Flush Rate(Duration 2~4mins)(suggested) | 7~9 acfm (12~15m3/h) | |
| Max. Trans-Membrane Pressure Drop(TMP) | 30 psi (0.2MPa / 2bar) | |
| Feed Water Temperature | 1~40ºC | |
| Active Membrane Area | 77 m2(829ft2) | |
| Filtrate Water Flow Range | 13~40 GPM (3~9M3PH) | |
| Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) | 100,000 Dalton (0.01µm~0.1 µm) | |
| Hollow Fiber Tubes In/Out Diameter | 0.6/1.2mm | |
| pH Range of Feed Water During Continuous Operation | 2~11 | |
| Operation Mode | Cross flow/Dead-end flow | |
| Max Feed Water Turbidity | < 300 NTU | |
| Product Water Turbidity | <0. 1 NTU | |
| Feed Water Particle size (max.) | < 300 µ | |
| Feed Water SDI15 | < 25 | |
| Product Water SDI15 | < 2.5 | |
| Product water average flow in system(Suggested) | Approximately 3M3PH |
UUF2860 | Filtration Type | Outside-In |
| Max. Working Pressure (@ 20ºC) | 94 psi (0.62MPa / 6.25bar) | |
| Suggested Working Pressure | 43 psi (0.3MPa / 3bar) | |
| Backwash pressure(suggested) | 36 psi (0.25Mpa /2.5bar ) | |
| Air Flush Rate(Duration 2~4mins)(suggested) | 7~9 acfm (12~15m3/h) | |
| Max. Trans-Membrane Pressure Drop(TMP) | 30 psi (0.2MPa / 2bar) | |
| Feed Water Temperature | 1~40ºC | |
| Active Membrane Area | 55 m2(592ft2) | |
| Filtrate Water Flow Range | 9~27 GPM (2~6M3PH) | |
| Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) | 100,000 Dalton (0.01µm~0.1 µm) | |
| Hollow Fiber Tubes In/Out Diameter | 0.6/1.2mm | |
| pH Range of Feed Water During Continuous Operation | 2~11 | |
| Operation Mode | Cross flow/Dead-end flow | |
| Max Feed Water Turbidity | < 300 NTU | |
| Product Water Turbidity | <0. 1 NTU | |
| Feed Water Particle size (max.) | < 300 µ | |
| Feed Water SDI15 | < 25 | |
| Product Water SDI15 | < 2.5 | |
| Product water average flow in system(Suggested) | Approximately 2.5M3PH |
| MODEL | L | L1 | L2 | L3 | D | In/out Ø |
| UF2860 | 1860 mm (73'') | 1500 mm (59'') | 1630mm (64'') | 1820 mm (72'') | 225mm (9'') | DN50 mm (2'') |
| UF2880 | 2360 mm (93'') | 2000 mm (79'') | 2130mm (84'') | 2320 mm (91'') | 225mm (9'') | DN50 mm (2'') |
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece