Precision Dicing Saw for Wafer Cutting Ds613

China Precision Dicing Saw for Wafer Cutting Ds613, Find details about China Dicing Saw, Dicing Machine from Precision Dicing Saw for Wafer Cutting Ds613

Basic Info.

Model NO.

Dicing Saw

Groove Depth

≤4mm or Customize

Alignment System

70X Straight Light + Ring Light(210X Optional)

Spindle: Revolution Speed Range

3000~40000 Rpm

Spindle: Output Power

1.25kw

X Axis: Feed Speed Range

0.1~400mm/S

Y Axis: Single-Step Accuracy

≤0.003mm/5mm

Z Axis: Repeatability Accuracy

0.002mm

Power Supply

Single Phase, AC220V±10%

Power Consumption

0.8kw (Processing); 0.7kw (Warming up)

Transport Package

Standard Export Packing

Specification

665mm× 850mm× 1650 mm; 500kg

Origin

China

HS Code

84862090

Model NO.

Dicing Saw

Groove Depth

≤4mm or Customize

Alignment System

70X Straight Light + Ring Light(210X Optional)

Spindle: Revolution Speed Range

3000~40000 Rpm

Spindle: Output Power

1.25kw

X Axis: Feed Speed Range

0.1~400mm/S

Y Axis: Single-Step Accuracy

≤0.003mm/5mm

Z Axis: Repeatability Accuracy

0.002mm

Power Supply

Single Phase, AC220V±10%

Power Consumption

0.8kw (Processing); 0.7kw (Warming up)

Transport Package

Standard Export Packing

Specification

665mm× 850mm× 1650 mm; 500kg

Origin

China

HS Code

84862090

Product Desciption

DS613 precision dicing machine uses DS-200 software control system, touch screen control and GUI interface so that the image alignment of workpiece is simple and convenient. DS613 has stable performance and low failure rate. DS613 is applicable to the cutting process of silicon, PCB, EMC, ceramic, glass, lithium niobate, quartz, sapphire, GaAs and crystal.

Features

Self-check and alarm function of height measurement system
Database management of workpiece and cutting blade
Two-way blade lifting for cutting
Graphic alignment function
Real-time display and early warning of blade edge exposure

Specifications
Configuration and performance	Workpiece size	Φ6'' \| ≤160mm x 160mm
	Groove depth	≤4mm or customize
	Table flatness	±0.005mm/100mm
	Alignment system	70x straight light + ring light(210x optional)
Spindle	Revolution speed range	3000~40000 rpm
Spindle	Output power	1.25kW
X axis	Drive mode	Servo motor
	Max. stroke	240mm
	Stroke resolution	0.001mm
	Feed speed range	0.1~400mm/s
Y axis	Drive mode	Step motor + grating closed-loop control system
	Max. stroke	170mm
	Stroke resolution	0.0005mm
	Single-step positioning accuracy	≤0.003mm/5mm
	Index positioning accuracy	≤0.005mm/170mm
Z axis	Drive mode	Step motor
	Max. stroke	30mm
	Stroke resolution	0.001mm
	Repeatability accuracy	0.002mm
Θ axis	Drive mode	Servo motor
	Max. rotating angle	360°
	Angle resolution	0.0005°
Basic specification	Power supply	Single phase, AC220V±10%
	Power consumption	0.8kW (processing)
	Power consumption	0.7kW (warming up)
	Compressed air	Pressure: 0.55~0.8Mpa; average flow rate: 350L/min
	Cleaning water	Pressure: 0.2~0.4Mpa; flow rate: 3.0L/min
	Cooling water	Pressure: 0.2~0.4Mpa; flow rate: 1.5L/min
	Exhaust air rate	2m³/min (ANR)
	Overall dimensions W×D×H	665mm×850mm×1650 mm
	Weight	500kg

Environmental Conditions

• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.

About Us:

Precision Dicing Saw for Wafer Cutting Ds613

Certifications:

FAQ:
1.   Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2.   Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3.   Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4.   Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5.   Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6.   Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.