China International Crane 70ton Qy70K Mobile Crane Truck, Find details about China Truck Crane, Mobile Truck Crane from International Crane 70ton Qy70K Mobile Crane Truck
PRODUCTS DESCRIPTIONS
QY70K-1 70 ton rc truck crane
1.High-power air-conditioner meets the requirements of T3 working condition
2.Hydraulic heat radiation system with superpower, permissible ambient temperature exceeds 55ºC
3. High-temperature resistant and ageing resistant wiring harness, service life covers product lifecycle
4.High-temperature resistant sealing elements, working efficiency is improved by 10%
5.High-temperature resistant oil for the whole crane is normally used in the ambient temperature above 55ºC
6.Ultraviolet resistant paint with strong ageing resistance
7.Multi-stage air inlet filtering system, much longer engine service life
8.Multi-stage air inlet filtering system, much longer engine service life
9.Efficiently sealed driver's cab and operator's cab, strong heat protection and anti-sand capability
Description | Unit | Parameter value | |
Overall length | mm | 13900 | |
Overall width | mm | 2800 | |
Overall Height | mm | 3575 | |
Axle base | 1st ,2nd axle | mm | 1470 |
2nd ,3rd axle | 4105 | ||
3rd ,4th axle | 1350 | ||
Wheel Base | mm | 2304+2075 | |
Total vehicle mass in travel configuration | kg | 43000 (not including auxiliary counterweight of 1t) | |
Axle load | 1st and 2nd Axle | kg | 17000 |
3rd and 4th Axle | 26000 | ||
Engine Model | WD615.338 | ||
Engine rated power | kw/(r/min) | 276/2200 | |
Engine rated torque | N.m/(r/min) | 1500/1400 | |
Engine rated rotational speed | r/min | 2100 | |
Max. travel speed | km/h | 80 | |
Min. steady travel speed | km/h | 3 | |
Min. turning diameter | m | 24 | |
Min. turning diameter at boom tip | m | 29 | |
Min. ground clearance | mm | 327 | |
Max. grade ability | % | 40 | |
Approach angle | ° | 19 | |
Departure angle | ° | 11 | |
Braking distance (at 30 km/h, full load ) | m | ≤10 | |
Oil consumption per 100km | L | 45 |
Description | Unit | Parameter value | |||
Max. total rated lifting capacity | t | 70 | |||
Min. rated working radius | m | 3 | |||
Turning radius at turntable tail | mm | 3550 | |||
Max. load moment | Base boom | KN.m | 2303 | ||
Fully-extended boom | 1129 | ||||
Fully-extended boom + Jib | 580.2 | ||||
Outrigger span | Longitudinal | m | 6.1 | ||
Lateral | 7.3 | ||||
Hoist height | Base boom | m | 11.8 | ||
Fully-extended boom | 44.2 | ||||
Fully-extended boom + Jib | 59.4 | ||||
Boom length | Base boom | m | 11.6 | ||
Fully-extended boom | 44.5 | ||||
Fully-extended boom + Jib | 59.5 | ||||
Jib offset angle | ° | 0, 15, 30 | |||
Time for boom raising | s | 60 | |||
Time for boom extending fully | s | 80 | |||
Max. slewing speed | r/min | 2 | |||
Telescoping time | Fully extended | s | 150 | ||
Fully retracted | 100 | ||||
Outrigger extending and retracting time | Outriggerbeam | ExtendingSimultaneously | s | 30 | |
RetractingSimultaneously | 20 | ||||
Outriggerjack | ExtendingSimultaneously | 35 | |||
RetractingSimultaneously | 30 | ||||
Hoisting speed | Main winch | No load | m/min | 130 | |
(single line | Full load | 75 | |||
Auxiliary winch | No load | 108 | |||
Full load | 98 | ||||
Exterior noise level | dB (A) | ≤122 | |||
Noise level at seated position | dB (A) | ≤90 |
CONTACT US