China Isuzu 6000lwater and Foam Tank Fire Fighting Equipment Fire Truck Fire Fighting Truck, Find details about China Fire Fighting Truck, Fire Truck from Isuzu 6000lwater and Foam Tank Fire Fighting Equipment Fire Truck Fire Fighting Truck
Chassis Specification | |||||
Truck model | CL5184GXFQ2 | ||||
Cab | ISUZU FTR CABIN | ||||
Driving Type | 4*2 Left hand driving | ||||
Max Speed (km/h) | 90 | ||||
Overall dimension(mm) | 8165*2480*3500 | ||||
GVW( kg) | 18100 | ||||
Mass in working order ( kg) | 10650 | ||||
Wheelbase(mm) | 4500 | ||||
F/R track base (mm) | 1960/1855 | ||||
F/R overhang (mm) | 1335/2300 | ||||
Approach/Departure Angel | 26/14 | ||||
Tire | 11.00R20 | ||||
Clutch | Single-plate dry diaphragm spring clutch | ||||
Steering | Hydraulic steering with power assistance | ||||
Gear box | MLD 6-speed | ||||
Bridge | Front axle | 6.3T | |||
Rear axle | 13T | ||||
Enging | Model | 4KH1-TCG50 | |||
Fuel Type | Diesel fuel | ||||
Type | Water-cooled four-stroke,, direct injection, turbocharged | ||||
Exhaust(ml) | 5913 | ||||
Max output power (hp ) | 205 | ||||
Max torque(N.m) | 650 | ||||
Braking system | Service Brake | Oil brake | |||
Park Brake | Spring energy | ||||
Eletric system | 24v | ||||
Upper-Body specification | |||||
Tank | Structure | Welding, there is clapboard inner. | |||
Material | Water Tank | High quality carbon steel plate, anti-rust treatment | |||
Capacity | Total | 6000L | |||
Water tank | 4000L | ||||
Foam tank | 2000L | ||||
Equipment box | Equipment box: at the back of carriage, there are two-layer clapboard, can store equipment. There is safe ladder to up and down on the back of equipment box. Structure: whole frame is welded to ensure intension and rigidity. Material: frame is high quality steel, inner plague is aluminum embossed sheet, surface is anodic processed. | ||||
pump room | on the rear or central of truck, there are pump system and pipeline, reasonable structure. Easily operate all meters and operate-switch. | ||||
Special Parts Parameter | Fire Pump | Type | Normal pressure fire pump | ||
Model | CB10/30 | ||||
Flux | 30L/S | ||||
Pressure | 1.0Mpa | ||||
Fire Monitor | Type | For water and foam | |||
Model | PL32 | ||||
Flux | 32L/S | ||||
Pressure | 1.0Mpa | ||||
Additional drive system | Use sandwich PTO, splashing-type lubricate, can put out fire when driving. | ||||
Additional operation system | PTP operation lever, fire pump valve operation lever, electronic control button, Hand accelerator operation lever and son on | ||||
Additional cooling system | The additional cooling system uses a mandatory water cooling for PTO. Can effectively control the fire truck equipment to extend the service life of equipment because of long hours of continuous work related to the heating | ||||
Additional Electrical system system | warning light ,warning sirens | ||||
Pump pneumatic control valve switch,Pump speedometer,Electronic level gauge | |||||
Fire lights, pump room lights, equipment box lights | |||||
Additional instrumentation | pressure gauge | ||||
speedometer | |||||
level gauge | |||||
vacuum gauge | |||||
Carriage | Carriage is made of high quality steel and Aluminum embossed sheet | ||||
Rolling shutter door | Light and high quality aluminum alloy rolling shutter door, neatly open and close, good seal, low noise, beauty outside, and with one set lock. | ||||
color | The whole vehicle is red for fire fighting, there are white in the middle of truck in accordance with the whole truck. |