20dBm Egsm+Dcs+WCDMA Tri Band Signal Amplifier/Signal Repeater

China 20dBm Egsm+Dcs+WCDMA Tri Band Signal Amplifier/Signal Repeater, Find details about China GSM Repeater, Tri Band Repeater from 20dBm Egsm+Dcs+WCDMA Tri Band Signal Amplifier/Signal Repeater

Model NO.
GW-20EDW
Tri Band Repeater
Egsm+Dcs+WCDMA
Band Width
Wide Band
Manual Gain Control
31dB     / 1dB Step
Trademark
Greetwin
Transport Package
Neutral Packing
Specification
CE, RoHS
Origin
Shenzhen
HS Code
8543709200
Model NO.
GW-20EDW
Tri Band Repeater
Egsm+Dcs+WCDMA
Band Width
Wide Band
Manual Gain Control
31dB     / 1dB Step
Trademark
Greetwin
Transport Package
Neutral Packing
Specification
CE, RoHS
Origin
Shenzhen
HS Code
8543709200
20dBm EGSM+DCS+WCDMA Tri Band Signal Amplifier/Signal Repeater


Model: GW-20EDW


Tri-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G wireless connectivity. It is connected via coaxial cable to Tri-Band Donor Antenna and Service Antenna, Tri-Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.

Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extention of the signal of base station. Optimization of the quality of the signal and source
3. Cover about 500~3000m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc

Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)

Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
FrequencyRangeUplinkDownlink
GSM900+DCS1800+WCDMA890- 915/1710 - 1785/
1920 - 1980MHz
935 - 960/1805 - 1880/
2110 - 2170MHz
EGSM900+DCS1800+WCDMA880- 915/1710 - 1785/
1920 - 1980MHz
925 - 960/1805 - 1880/
2110 - 2170MHz
GSM900+DCS1800+LTE2600890- 915/1710 - 1785/
2500 - 2570MHz
935 - 960/1805 - 1880/
2620 - 2690MHz
GSM850+PCS1900+AWS1700824 - 849/1850 - 1910/
1710 - 1755MHz
869 - 894/1930 - 1990/
2110 - 2155MHz
LTE800+900+3G832- 862/890- 915/
1920 - 1980MHz
791- 821/935 - 960/
2110 - 2170MHz
Max. Gain65dB70dB
Max. Output Power10-15dBm10-20dBm
Band widthWide Band
Manual Gain Control31dB     / 1dB Step
Automatic Gain Control>20dB
Ripple in-band≤6dB
Return loss≤ -10dB
Noise Figure≤ 6dB
Spurious Emission
&Intermodulation
9KHz~1GHz≤ -36dBm
1~12.75GHz≤ -30dBm
WCDMASpurious Emission MaskMeet 3GPP TS 25.143 ( V 6.2.0 )
Modulation Accuracy≤ 12.5%
Peak Code Domain Error≤ -35dB@Spreading Factor 256
Time Delay≤ 1.5 μs
Frequency stability≤ 0.01ppm
MTBF> 50000 hours
Impedance50 ohm
Power SupplyAC100-240V,DC10V/7A
Power LEDPower Indicator
ALC LEDOrange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
LED off after 5 seconds red color
Mechanical Specification
RF ConnectorN-Female
SwitchPower Switch\Manual Gain Control Switch
CoolingHeatsink Convection cooling
Humidity< 90%
Operating Temperature-10'c~55'c
Environment ConditionsIP40
Installation TypeWall Installation
Size264*354*58mm
Weight< 5Kg

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)


Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A.  Drill holes in the selected place and install expansion bolts.
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.


Connection:
A.  BTS Port: donor antenna cable is connected with Outdoor Port;
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN connected with Power adaptor.

20dBm Egsm+Dcs+WCDMA Tri Band Signal Amplifier/Signal Repeater

FAQ

Q1.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please
us with more details.

Q2.Delivery Date&Lead Time

QuantityLead timeDelivery to American/Middle East/Asia/Europe
<20 pcs3-5 business days3-7 business days by DHL
5-7 business days by FedEx/UPS
20-100 pcs7-15 business days
>100 pcs15-24 business days
* it to get the sample.

Q3. Can I customize frequencies?

Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.

Q4. What should I do if I don't know about frequency in my country?

Please feel free to us with your inquiry, we will find the frequency you need and address your problems. 

Other Signal Repeater

More signal repeater please it!
20dBm Egsm+Dcs+WCDMA Tri Band Signal Amplifier/Signal Repeater
 

Company Profile



20dBm Egsm+Dcs+WCDMA Tri Band Signal Amplifier/Signal Repeater

 


20dBm Egsm+Dcs+WCDMA Tri Band Signal Amplifier/Signal Repeater