Products

155m Bidi 20km Optical Transceiver Tx1330/Rx1550nm SFP Module SMF

China 155m Bidi 20km Optical Transceiver Tx1330/Rx1550nm SFP Module SMF, Find details about China SFP, 100m SFP from 155m Bidi 20km Optical Transceiver Tx1330/Rx1550nm SFP Module SMF

Model NO.
SFP
Transmission Distance
20km, 40km, 80km
Trademark
PHYNAM
Transport Package
Unit Carton Size: 160mm*126mm*70mm
Specification
CE/EMC, CE/LVD, FCC Certification
Origin
Dongguan Guangdong China
HS Code
8517623210
Model NO.
SFP
Transmission Distance
20km, 40km, 80km
Trademark
PHYNAM
Transport Package
Unit Carton Size: 160mm*126mm*70mm
Specification
CE/EMC, CE/LVD, FCC Certification
Origin
Dongguan Guangdong China
HS Code
8517623210
155Mbps SFP Transceiver,

 
Product Features
  • Supports up to 155Mbps bit rates
  • Hot-pluggable SFP footprint
  • 1550nm DFB laser and PIN photo detector, Up to 80km for SMF transmission
  • Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
  • Compatible with RoHS
  • Single +3.3V power supply
  • Real Time Digital Diagnostic Monitoring
  • Operating case temperature:
Standard:  0 to +70°C
Industrial: -40 to +85°C

Applications
  • 155Mbps Optical systems
  • Fast Ethernet
  • SONET OC-3 LR2
  • Other Optical links


Description
The SFP transceivers are high performance, cost effective modules supporting data rate of 125Mbps/155Mbps and 80km transmission distance with SMF.

The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

Transceiver functional diagram


Absolute Maximum Ratings
ParameterSymbolMinMaxUnit
Supply VoltageVcc-0.54.5V
Storage TemperatureTs-40+85°C
Operating Humidity-585%



Recommended Operating Conditions
ParameterSymbolMinTypicalMaxUnit
Operating Case TemperatureStandardTc0 +70°C
Extended-20 +80°C
Industrial-40 +85°C
Power Supply VoltageVcc3.1353.303.465V
Power Supply CurrentIcc  300mA
Data Rate  155 Mbps




Optical and Electrical Characteristics
ParameterSymbolMinTypicalMaxUnitNotes
Transmitter
Centre Wavelengthλc153015501570nm 
Spectral Width(-20dB)Δλ  1nm 
Side-Mode Suppression RatioSMSR30--dB 
Average Output PowerPout-5 +1dBm1
Extinction RatioER9.0  dB 
Data Input Swing DifferentialVIN180 1200mV2
Input Differential ImpedanceZIN90100110Ω 
TX DisableDisable 2.0 VccV 
Enable 0 0.8V 
TX FaultFault 2.0 VccV 
Normal 0 0.8V 
Receiver
Centre Wavelengthλc1260 1610nm 
Receiver Sensitivity   -33dBm3
Receiver Overload -8  dBm3
LOS De-AssertLOSD  -34dBm 
LOS AssertLOSA-45  dBm 
LOS Hysteresis 0.5 4dB 
Data Output Swing DifferentialVout6008001000mV4
LOSHigh2.0 VccV 
Low  0.8V 
         
Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 223-1 test pattern @155Mbps, BER ≤1×10-12.
4. Internally AC-coupled.







Timing and Electrical
ParameterSymbolMinTypicalMaxUnit
Tx Disable Negate Timet_on  1ms
Tx Disable Assert Timet_off  10µs
Time To Initialize, including Reset of Tx Faultt_init  300ms
Tx Fault Assert Timet_fault  100µs
Tx Disable To Resett_reset10  µs
LOS Assert Timet_loss_on  100µs
LOS De-assert Timet_loss_off  100µs
Serial ID Clock Ratef_serial_clock 100400KHz
MOD_DEF (0:2)-HighVH2 VccV
MOD_DEF (0:2)-LowVL  0.8V


Diagnostics
ParameterRangeUnitAccuracyCalibration
Temperature  0 to +70°C±3°CInternal
-20 to +80
-40 to +85
Voltage3.0 to 3.6V±3%Internal
Bias Current0 to 100mA±10%Internal
TX Power-5 to +1dBm±3dBInternal
RX Power-33 to -6dBm±3dBInternal






Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).

The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.

The digital diagnostic memory map specific data field defines as following.

Pin Descriptions

 
PinSignal NameDescriptionPlug Seq.Notes
1VEETTransmitter Ground1 
2TX FAULTTransmitter Fault Indication3Note 1
3TX DISABLETransmitter Disable3Note 2
4SDASDA Serial Data Signal3 
5SCLSCL Serial Clock Signal3 
6MOD_ABSModule Absent. Grounded within the module3 
7RS0Not Connected3 
8LOSLoss of Signal3Note 3
9VEERReceiver ground1 
10VEERReceiver ground1 
11VEERReceiver ground1 
12RD-Inv. Received Data Out3Note 4
13RD+Received Data Out3Note 4
14VEERReceiver ground1 
15VCCRReceiver Power Supply2 
16VCCTTransmitter Power Supply2 
17VEETTransmitter Ground1 
18TD+Transmit Data In3Note 5
19TD-Inv. Transmit Data In3Note 5
20VEETTransmitter Ground1 
Notes:
Plug Seq.: Pin engagement sequence during hot plugging.
1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2) Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3) LOS is open collector output.  Should be pulled up with 4.7k~10kΩ on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
4) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines which should be terminated with 100Ω (differential) at the user SERDES.
5) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with 100Ω differential termination inside the module.

Recommended Interface Circuit

Mechanical Dimensions

155m Bidi 20km Optical Transceiver Tx1330/Rx1550nm SFP Module SMF
 

You Might Also Like