Products

Hydraulic Dead Weight Tester

China Hydraulic Dead Weight Tester, Find details about China Dead Weight Tester, Pressure Gauge Tester from Hydraulic Dead Weight Tester

Trademark
YUNYI
Specification
23kg
Origin
China
Trademark
YUNYI
Specification
23kg
Origin
China

Hydraulic dead weight tester
 dead weight tester pressure calibrator is a calibration standard which uses a piston cylinder on which 

a load is placed to make an equilibrium with an applied pressure underneath the piston.Deadweight testers are 

so called primary standards which means that the pressure measured by a deadweighttester is defined through other quantities; Length, mass and time.Typically deadweight testers are used in calibration laboratories to 

calibrate pressure transfer standards like electronic pressure measuring devices.

 

specification Hydraulic dead weight tester

ModelYS-6YS-60YS-250YS-600
Measure Rangebar0.04-0.60.1-60.5-251-60
Accuracy%0.02 or 0.05
Nominal Area of Pistoncm210.50.20.1
Carrier and PistonNominal Masskg0.40.511
Produced Pressurebar0.41510
Supplied WeightsNominal Masskg0.10.50.52.51515
Produced Pressurebar0.10.5155251050
Quantity Blockpcs61041149411
Pressure ConnectionM 20×1.5
Working MediumTransformer Oil (viscosity 9~12 centistokes at 20i),
or Medical Castor Oil (aciditymg KOH/g)
Dimensionsmm630×382×593
Weightkg20+5.626+29.526+4926+59

eatures

Hydraulic Dead Weight TesterHydraulic Dead Weight TesterPiston Hydraulic dead weight tester
YS-6 Deadweight Tester. Pressure Range 5.8 - 87psi. Accuracy: 0.015% or 0.020% of reading.
YS-60 Deadweight Tester. Pressure Range 14.5 - 870 psi. Accuracy: 0.015% or 0.020% of reading.
YS600 Deadweight Tester. Pressure Range 145 - 8700 psi. Accuracy: 0.015% or 0.020% of reading

FAQ
Q:How long will you reply me?

A:We will contact you as soon as possible but within 12 hours

Q: Can I get some samples?

A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

Q: How soon can you arrange your production?

A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.

Q: What's delivery time?

A: It usually takes about 3-5 working days for small order and 10-15 days for big order.

Q:How do you control your quality ?

A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).

Q: What certificates do you have ?

A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.

Q:Could I visit your factory?

A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.

Q: What's your warranty terms?

A: We offer 12 months warranty time.

Q:can you provide OEM & Customized service?

A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.

Company Information

 

You Might Also Like