Products

Nitrogen Gas Dead Weight Tester

China Nitrogen Gas Dead Weight Tester, Find details about China Piston Deadweight Tester, Deadweight Tester from Nitrogen Gas Dead Weight Tester

Model NO.
FKQ0.25
Trademark
Yunyi
Origin
China
Model NO.
FKQ0.25
Trademark
Yunyi
Origin
China

Pressure Gauge Calibrator Dead Weight Tester

Nitrogen gas dead weight tester

Nitrogen Gas Dead Weight Tester

 

Features nitrogen gas dead weight tester:

1. The piston system uses tungsten carbide materials, wear-resistant, temperature drift coefficient and long service life.
2. Pressure range -100KPa ~ 600KPa within optional
3. Meet JJG1086-2013 "gas piston gauge test procedures".Different form traditional oil-lubricated gas piston gauge.
4. Quick Pressure Interface , convenient and quick.
5. The unique valve design, convenient regulator.
6. Optional temperature, pressure drop digital signage system, convenient and quick.
7. The positive and negative pressure switch, convenient and quick.
8. Measuring range: agreement on behalf of the nominal measuring range and the actual measurement range.
9. Piston system can easily take out  calibrate (not to carry heavy main frame)

 

Application Nitrogen gas dead weight tester:

.Measure and calibration gauge pressure, absolute pressure, vacuum pressure (negative pressure), etc.

 

 

Parameter Nitrogen gas dead weight tester:

 

Model number

Pressure range(MPa)

Accuracy

Medium

SLK-FKQ0.25

-0.1~0.25

0.05%

0.02%

0.01%

0.005%

Pure nitrogen

SLK-FKQ0.6

-0.1~0.6

Pure nitrogen

 


Features:

2 Piston and cylinder grinding by Seiko, the roundness error and the gap is extremely small, and thus greatly improve piston rotation duration, there is a corresponding decrease in the rate of decline of the piston, increased discrimination.
3There's shut-off valve for the target gauge, can beshut off the pressure  between the subject system.
4 Weight has been corrected pressure deformation coefficient and the local acceleration of gravity.
5 Optional digital display: digital temperature, displacement, pressure and other parameters of the display;
6 Measuring range: Nominal Nominal measurement range consistent with the actual measurement range.
7 Piston system can easily take out to calibrate(not to carry heavy main frame).
8The weights unit could be Kg and MPa.
9 Advanced pressurization system, lightweight and durable. Can be easily suppressed to 100MPa.
10 Using weights hanging basket structure, low center of gravity, excellent stability.
11 With fast pressure connections, no leakage.
12 Each were issued northwest measurement test center test certificate



Application

Psiton pressure balance mainly used in oil industry, a instrument apply to measure fluid pressure, but much accurate than pressure gauge, used to check the pressure gauge or pressure sensor reading.In the pipeline pressure test, the pipeline welding is completed to conduct stress tests, stress tests primarily to pressure capacity and the existence of micro-leakage test tube, and the pressure balance of uncertainty and sensitivity and precision are currently unable to replace all instruments and so the pressure balance is one of the indispensable test piping pressure instrument.

 

In the pipeline pressure test, the pipeline is welded to complete the pressure test, the pressure test is mainly to test the pressure capacity of the pipeline and whether there is a micro-leakage, and the uncertainty and sensitivity of the pressure balance and high precision are all the instruments can not be replaced , so pressure scales are one of the indispensable instruments for pipeline pressure testing.
Pressure balances are academically called piston pressure gauges and are very important pressure references. Pressure balances are isolated and improved on the basis of piston pressure gauges and are more suitable for pipeline pressure testing.


Relate Products

Nitrogen Gas Dead Weight TesterNitrogen Gas Dead Weight Tester

 

FAQ

Q:How long will you reply me?

A:We will contact you as soon as possible but within 12 hours

Q: Can I get some samples?

A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

Q: How soon can you arrange your production?

A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.

Q: What's delivery time?

A: It usually takes about 3-5 working days for small order and 10-15 days for big order.

Q:How do you control your quality ?

A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).

Q: What certificates do you have ?

A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.

Q:Could I visit your factory?

A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.

Q: What's your warranty terms?

A: We offer 12 months warranty time.

Q:can you provide OEM & Customized service?

A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.

Nitrogen Gas Dead Weight Tester

Nitrogen Gas Dead Weight Tester

Nitrogen Gas Dead Weight Tester

You Might Also Like