Low Cost Dead Weight Tester Pressure Calibrator

China Low Cost Dead Weight Tester Pressure Calibrator, Find details about China Piston Pressure Gauge, Dead Weight Tester from Low Cost Dead Weight Tester Pressure Calibrator

Basic Info.

Model NO.

YS Series

Trademark

Yunyi

Origin

China

Model NO.

YS Series

Trademark

Yunyi

Origin

China

Product Desciption

Low Cost Cost Dead Weight Tester Pressure Calibrator

Description

Low cost dead weight tester pressure calibrator is a calibration standard which uses a piston cylinder on which

a load is placed to make an equilibrium with an applied pressure underneath the piston.Deadweight testers are

so called primary standards which means that the pressure measured by a deadweighttester is defined through other quantities; Length, mass and time.Typically deadweight testers are used in calibration laboratories to

calibrate pressure transfer standards like electronic pressure measuring devices.

Detailed Images
Low Cost Dead Weight Tester Pressure Calibrator

Specification

Model			YS-6		YS-60		YS-250		YS-600
Measure Range		bar	0.04-0.6		0.1-6		0.5-25		1-60
Accuracy		%	0.02 or 0.05
Nominal Area of Piston		cm2	1		0.5		0.2		0.1
Carrier and Piston	Nominal Mass	kg	0.4		0.5		1		1
	Produced Pressure	bar	0.4		1		5		10
Supplied Weights	Nominal Mass	kg	0.10.5		0.52.5		15		15
	Produced Pressure	bar	0.10.5		15		525		1050
	Quantity Block	pcs	610		411		49		411
Pressure Connection			M 20×1.5
Working Medium			Transformer Oil (viscosity 9~12 centistokes at 20i), or Medical Castor Oil (aciditymg KOH/g)
Dimensions		mm	630×382×593
Weight		kg	20+5.6	26+29.5		26+49		26+59

Features

YS-6 Deadweight Tester. Pressure Range 5.8 - 87psi. Accuracy: 0.015% or 0.020% of reading.
YS-60 Deadweight Tester. Pressure Range 14.5 - 870 psi. Accuracy: 0.015% or 0.020% of reading.
YS600 Deadweight Tester. Pressure Range 145 - 8700 psi. Accuracy: 0.015% or 0.020% of reading

Ralate Products

Low Cost Dead Weight Tester Pressure Calibrator

FAQ

Q:How long will you reply me?

A:We will contact you as soon as possible but within 12 hours

Q: Can I get some samples?

A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

Q: How soon can you arrange your production?

A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.

Q: What's delivery time?

A: It usually takes about 3-5 working days for small order and 10-15 days for big order.

Q:How do you control your quality ?

A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).

Q: What certificates do you have ?

A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.

Q:Could I visit your factory?

A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.

Q: What's your warranty terms?

A: We offer 12 months warranty time.

Q:can you provide OEM & Customized service?

A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.

Low Cost Dead Weight Tester Pressure Calibrator