Hot DIP Galvanized Steel Tower

China Hot DIP Galvanized Steel Tower, Find details about China Power Transmission Line Tower, Iron Tower from Hot DIP Galvanized Steel Tower

Model NO.
wx49
Structure
B Type
Trademark
wuxiao
Transport Package
Standard
Specification
CE
Origin
China, Qingdao
Model NO.
wx49
Structure
B Type
Trademark
wuxiao
Transport Package
Standard
Specification
CE
Origin
China, Qingdao
Hot DIP Galvanized Steel Tower

Hot DIP Galvanized Steel Tower
Hot DIP Galvanized Steel Tower
Hot DIP Galvanized Steel Tower



We are power all kinds of steel tower, such as transmission steel tower, microwave communication tower, broadcasting tower, telecommunication tower, television tower, cable tower, electrical pipe tower, lightning tower, bionic tower, single tube tower, wind tower, wind tower flange, large diameter welded pipe, light pole and more such as the tower, can also according customer requirements for processing production


Power steel tube tower specifications as follows:Overhead transmission line 10kV, 35kV, 66kV, 110kV ,220kV,500kV etc.


Single circuit, double circuit, four circuit, six circuit
Material: GB Q235, Q345 and Q420 (A36, A572 Gr.50)  or others
Appearance: hot-dip galvanized
Payment: TT/LC
Price validity: 30 days
1. Our Main Products for Lattice Series
Boxiang Steel Structure is a professional manufacturer of steel towers. We engineers and fabricates different types of transmission tower such as 10kv, 33kv, 66kv, 69kv, 110kv, 132kv, 220kv, 230kv, 400kv, 500kv,750kv,and1000kv .Single Circuit, Double Circuit, and Multi Circuit Lattice Tower. And also We mainly deal with galvanized angle steel tower. Different types of towers in a complete transmission line as Crossing Tower, Tension Tower, Angle Tower, Terminal Tower, Transposition Tower are available. 
2. Products Fabrication Process
The transmission towers are manufactured in complete knocked-down condition following the procedures as per  our quality assurance plan. The general of production procedure is briefly describled as Fabrication and Galvanizing. Process of fabrication comprises of cutting, satmping, strengthening, punching, notching, bending and heel grinding. Then the products are ready for galvanizing which is one of critical process in all production.
Details of Galvanizing:
1. Degreasing of tower parts with Sodium Hydroxide solution.
2. Pickling to clean up the surface with HCl solution
3. Rinsing twice with fresh water to remove the acid content.
4. Fluxing wth synth flux to prepare surface for galvanizing.
5. Drying on hot plate.
6. Dipping in zinc bath with 99.95% pure zinc at 450° C to 465° C temperature.
7. Quenching in water.
8. Dichromating.
Thickness< 5mm, galvanization thickness≥ 460G/M² (65um)
Thickness> 5mm, galvanization thickness≥ 610G/M² (86um)
All our galvanizing zinc thickness is strictly tested before delivery in view of its importance.
3. Our Products Advantages
We fabricates every tower by solid steel legs and angle iron cross members & pipes. tower can reach heights up to 268 meter. Boxiang Steel is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies. 
4. Products Samples and Trial Assembly

Other Terms:
1. Price Term: EXW, FOB, CFR or CIF.
The price includes pole shaft, base plate, crossarm and anchor part.
Shipping seaport: Qingdao Port. For FOB, CFR or CIF price, please specify which exact model you need, and tell us your order quantity so that we can calculate the local transport charges and sea freight.
2. MOQ: 1 SETS
3. Payment: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.
4. Package: Plastic paper or according to clients requirement.
5. Delivery: for 30 sets, goods can be ready for shipment within 20 workdays after            receiving deposit.
6. Parts Design Service Period: 22 years.
Always Welcome to contact us for further information.
Address: Wuxiao Building,East Lanzhou Road, Jiaozhou, Qingdao, China.
Tel: 86-532-81120580   Fax: 86-87275396   Phone: 86-18765420196



 

Height
From 9 meter to 268 meter
Suit forElectric Power Transmission and Distribution
ShapeAngle
MaterialNormally    Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²
              Q235B/A36, Minimum Yield Strength ≥ 235 N/mm²
As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400
Power Capacity10KV to 1000KV
Tolerance
of the dimension
According to your  requirement.
Surface treatmentHot dip galvanized Following ASTM A 123, or any other standard by client required.
Thickness< 5mm, galvanization thickness≥ 460G/M² (65um)
Thickness> 5mm, galvanization thickness≥ 610G/M² (86um) 
Joint of Sectionbolts and nuts.
StandardISO 9001:2008
Length of per sectionAccording to your request.
Welding StandardAWS (American Welding Society ) D 1.1
CO2 welding or Submerged arc auto methods
Thickness4mm  to 55mm
Production ProcessRaw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages
CapacityProductAnnual Production Capacity(TON)Monthly Production Capacity(TON)
1Tubular Tower 12000010000
2AngleTower12000010000
3Steel Structure600005000
4Total Production Capacity12000010000
 


Hot DIP Galvanized Steel Tower