China Lonking 5ton Telescopic Wheel Loader Cdm856, Find details about China Front End Loader, Small Loader from Lonking 5ton Telescopic Wheel Loader Cdm856
POWERFUL WEICHAI DEUTZ ENGINE
LONKING TRANSMISSION
LONKING AXLES
JOYSTICK CONTROL
4.5M DUMPING HEIGHT
AC AND ROPS&FOPS CABIN
VARIETY WITH ATTACHMENT
CONVENIENT MAINTENANCE
RATED POWER:105kW/2200rpm
BUCKET CAPACITY:2.0m³
RATED PAYLOAD:1800kg
OPERATING WEIGHT:11800kg
NO. | DESCRIPTION | UNIT | DIMENSIONS |
A | Overall Height - Bucket Raised | mm | 5323 |
B | Bucket Pin Height at Max. Lift | mm | 4163 |
C | Dump Clearance at Max. Lift ( 45°) | mm | 3080 |
D | Reach at Max. Lift and 45° Dump | mm | 1256 |
E | Rack Back Angle at Carry | ° | 49.3 |
F | Rack Back Angle at Ground | ° | 46 |
G | Digging Depth | mm | 50 |
H | Rack Back Angle at Max. Lift | ° | 58.3 |
I | Dump Angle at Max. Lift | ° | 45 |
J | Carry Height | mm | 400 |
K | Ground Clearance | mm | 409 |
L | Center Line of Front Axle to Hitch | mm | 1615 |
M | Wheel Base | mm | 3230 |
N | Overall Length | mm | 8100 |
O | Departure Angle | ° | 32.6 |
P | Height to Top of Cab | mm | 3380 |
Q | Overall Width over Bucket | mm | 3010 |
R | Min. Turning Radius over Bucket | mm | 7240 |
S | Min. Turning Radius over Tires | mm | 6537.5 |
T | Steering Angle - Left/Right | ° | 35 |
U | Width at Tread Center | mm | 2240 |
V | Overall Width over Tires | mm | 2835 |
OVERALL DATA | |
Bucket Capacity | 3.0m³ |
Rated Payload | 5000kg |
Operating Weight | 17300±300kg |
Traction Force | 155±3kN |
Breakout Force | 170±3kN |
L×W×H | 8100×3010×3380mm |
ENGINE&ELECTRICAL SYSTEM | |
Maker/Model | WEICHAI/WD10G220E21 |
Emission Standard | EPA (Tier)/National |
Engine Type | 4 Stroke,Turbocharged,Water-cooled,Direct Injection,Diesel Engine |
Rated Power | 162kW(220hp)/2200rpm |
Maximum Torque | 860N·m/1400-1600rpm |
Bore x Stroke (mm) | 126×130 |
No. of Cylinders/Displacement | 6/9.726L |
Compression Ratio | 17 |
Air Cleaner | Three Stage Air Cleaner with Cyclone Pre-cleaner |
Alternator | 55Amp |
Battery | 2-24V/120Ah |
Starting Motor | 24V/7.5kW |
Heating Capacity (W) | 5000W |
Cooling Capacity (W) | 4700W |
DRIVE TRAIN | |||||
Transmission Type | Planetary Powershift Transmission | ||||
Shift Type | Mechanical Powershift Control | ||||
Pressure of Transmission | 1.2-1.5MPa | ||||
Torque Converter Type | Single-stage,Duo-turbine,4-element | ||||
Torque Ratio | 4 | ||||
Axles | Rigid Front Axle&Oscillating Rear Axle | ||||
Rear Axle Oscillation (°) | ±10° | ||||
Differential | Conventional | ||||
Main Reducer | Spiral Bevel,1-stage Reduction | ||||
Final Reducer | Planetary Reduction | ||||
Tire | 23.5-25 L-3 16PR TT | ||||
Travel Speeds | km/h | 1st | 2nd | 3rd | 4th |
Forward | 11.5 | 36 | |||
Reverse | 16 |
BRAKE SYSTEM | |
Service Brake | Single Circuit Caliper,Dry Brake |
Setting Pressure | 0.70-0.78MPa |
Parking Brake | Air Actuated Caliper Brake |
Emergency Brake | Air Actuated Caliper Brake |
STEERING SYSTEM | ||
Type | Hydraulic Load Sensing System | |
Pump | Gear Pump,176L/min·2200rpm | |
System Pressure | 15MPa | |
Cylinder | Type | Double Acting |
Bore x Stroke | 2-100×324mm | |
Steering Angle | ±35° |
HYDRAULIC SYSTEM | ||||||
Type | Single-lever(Joystick) Control | |||||
Pump | Gear Pump,220L/min·2200rpm | |||||
Control Valve | 2 Spool (Bucket&Boom) | |||||
System Pressure | 16MPa | |||||
Cylinder | Lift Cylinder | 2-180×721mm | ||||
No.-Bore x stroke | Tilt Cylinder | 1-200×563mm | ||||
Joystick Control Pressure | 2.5MPa | |||||
Cycle Time | Raise | Dump | Lower | Total | ||
(Sec) | 6 | 1 | 4 | 11 |
SERVICE REFILL CAPACITY | |
Fuel Tank (L) | 285L |
Hydraulic Tank (L) | 270/275(3rd Spool for Auxiliary Function)L |
Crankshaft (L) | 20L |
Transmission (L) | 46L |
Front Axle/Rear Axle (L) | 28L/28L |