Hg8546m Gpon ONU Ont 1ge+3fe+ 1tel +WiFi Router Huawei English Firmware

China Hg8546m Gpon ONU Ont 1ge+3fe+1tel+WiFi Router Huawei English Firmware, Find details about China Hg8546m, Hg8546 from Hg8546m Gpon ONU Ont 1ge+3fe+1tel+WiFi Router Huawei English Firmware

Basic Info.

Model NO.

hg8546m

Trademark

HONGKING

Specification

1GE+3FE+1TEL+WIFI

Origin

China

HS Code

8517622100

Model NO.

hg8546m

Trademark

HONGKING

Specification

1GE+3FE+1TEL+WIFI

Origin

China

HS Code

8517622100

Product Desciption

HUAWEI Echolife HG8546M ONT

Hg8546m Gpon ONU Ont 1ge+3fe+1tel+WiFi Router Huawei English Firmware

HG8546M GPON ONT is a new terminal level GPON ONT, which is a variety of FTTB \ FTTH \ FTTO accessing ONT published by HUAWEI for ISPs FTTH network applications. It can support pure data, Data +Voice, Data+ Voice+ WIFI and other service accessing type. HG8546M ONT supports standard OMCI, can provide up to 1.25Gbps uplink and 2.5Gbps downlink high-speed transfer rate. It can fully meet ISPsFTTB\FTTH\FTTO equipment needs, working with our NGBN unified network management system. The full
functionality of HG8546M can support
Hg8546m Gpon ONU Ont 1ge+3fe+1tel+WiFi Router Huawei English Firmware

Specifications

Parameters	EchoLife EG8546M
Dimensions (H x W x D)	156 x 125 x 28 mm
Gross Weight	210g
Operating Temperature	0°C to 50°C
Operating Humidity	5% RH to 95% RH (non-condensing)
Power Adapter Input	100 V to 240 V AC, 50 Hz/60 Hz
System Power Supply	11 V to 14 V DC, 0.5 A
Ports	1GE+3FE+1POTS+1USB+11n WIFI G
Optical Connector	SC/UPC
Indicators	Power/PON/LOS/LAN/TEL/USB/WLAN/WPS

Features

GPON WAN port with 1.244Gbps uplink / 2.488Gbps downlink link speed
Active Ethernet WAN port with 1.25Gbps bi-direction link speed
1x GE+3FE Ethernet RJ45 Ports
2x2 11n WIFI support 300Mbps link speed
1x FXS RJ11 ports for Voice service
1x USB ports in host or device mode
DC 12V adaptor, max 1.5A current
-5 to 50ºC operating ambient temperature

Mounting an ONT onto the wall

Mark two positions with the same spacing as that between the two mounting holes of the ONT using a marker on a wall.
Select a proper drill bit according to the outer diameter of the screws. Use a hammer drill to drill the marked positions on the wall. Then clean the holes and install two expansion bolts.
Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out of the wall, and mount the ONT onto the screws