Products

Whole Water System Blend Polyol SD2104

China Whole Water System Blend Polyol SD2104, Find details about China Polyol, Blend Polyol from Whole Water System Blend Polyol SD2104

Model NO.
sd2104
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
Model NO.
sd2104
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
WHOLE WATER SYSTEM BLEND POLYOL SD2104
RIGID PU FOAM FOR PIPE INSULATION

PRODUCT INTRODUCTION
SD2104 is a kind of blend polyol of whole water system used in pipe insulation. This kind of product use zero ozone depleting blowing agent (0 ODP), SD2104 use CO2 as the blowing agent, which produced through the reaction of water and isocyanate. Every performance of SD2104 finished foam products can meet the requirements of GB/T29047 standard.
The foam produced has the characteristics as following:
  1. Water blowing agent, environmental protection, zero ozone depleting blowing agent(0 ODP).
  2. Every performance of the foam product meets the requirements of GB/T29047 standard.
  3. Every performance of the foam product is very stable.

TYPICAL PHYSICAL PROPERTIES
Physical ProperitiesTest MethodMetricValue
Core DensityGB/T 6343-2009kg/m360up
Radial Compressive StrengthGB/T 8813-2008MPa0.3up
Initial Thermal Conductivity(50°C)GB/T 10294-2008W/(m·K)≤0.033
Close Cell ContentGB/T 10799-2008%≥88
Water AbsorptionGB/T 8810-2005%≤10
Air BubblesGB/T 29047mm1/3Insulation Thickness.
Average Cell Size.GB/T 29047mm≤0.5
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions. For our products, the data are not legally binding.

.

SAFETY PRECAUTIONS:
Direct contact with SD2102 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
                                                                                       
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.




 

You Might Also Like