Products

48*SFP Ports with 6*1000m RJ45 Combo Ports Managed 48 Ports Network Switch 10g Uplink

China 48*SFP Ports with 6*1000m RJ45 Combo Ports Managed 48 Ports Network Switch 10g Uplink, Find details and Price about China 10g Switch, 4 Ports 10g SFP+ from 48*SFP Ports with 6*1000m RJ45 Combo Ports Managed 48 Ports Network Switch 10g Uplink

Model NO.
S5158G-48S-4SE
Trademark
PHYNAM
Origin
Dongguan Guangdong China
HS Code
85176219
Model NO.
S5158G-48S-4SE
Trademark
PHYNAM
Origin
Dongguan Guangdong China
HS Code
85176219
     
  
L2 S5158G-48S-4SE 10Gigabit Ethernet Switch
 
Product overview
S5158G-48S-4SE 10Gigabit Managed Switch is standard third-layer non-blocking switch. Based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, S5158G-48S-4SE provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.The user can set all kinds of functions of switch through the Web, SNMP and so on. S5158G-48S-4SE support 2nd layer and 3rd layer VPN, DOS defense, static routing, RIP, OSPF, BGP, PIM-SM, PIM-DM, DVMRP, NAT, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
48*SFP Ports with 6*1000m RJ45 Combo Ports Managed 48 Ports Network Switch 10g Uplink48*SFP Ports with 6*1000m RJ45 Combo Ports Managed 48 Ports Network Switch 10g Uplink

Product specification
ModelS5158G-48S-4SE
Basic characteristics
Fixed port 48*GIGA fiber ports, 6*GE combo ports
Extensible port4 extensible 10G ports
Backplane bandwidth 176Gbps
Packet forwarding rate 130.944Mpps
Processor RISC 400MHz
Flash memory capacity8MB
The memory capacity 128MB
Address table 32K
Product characteristics
Spanning treeSupport STP, RSTP, MSTP
Support PVST/PVST+
VLANSupport port-based VLAN
Support MAC-based VLAN
Support 802.1Q labeled VLAN
Support for Super Vlan
Support for Private Vlan
Support for the GVRP dynamic VLAN configuration
Support QinQ and flexible QinQ
Support for Voice VLAN
Flow control Based on a standard IEEE 802.3x flow control
Using IEEE 802.1Qbb priority flow control
Support CAR function
Broadcast control Restraining broadcast storm, stop sending so long as reaching a critical point
multicast control IGMP Snooping multicast message automatic monitoring
multicast routingIGMP v1/v2/v3, MLDv2
PIM-SM, OLINK&PIM-DM
DVMRP (Distance Vector Multicast Routing Protocol)
GMRP (multicast dynamic registration protocol)
Port binding Each group of a maximum of 8, while support 128 group
LACP dynamic or static polymerization
Port mirroring Support based on flow classification mirroring and port mirroring
Stacked Stacked 16 hard, soft stacking 32
Using clustering techniques, with a unified centralized management of IP address
to do address resource saving
Routing management Static routing
RIP v1/v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP), BGPv4, ISIS, BGP
Anti virus intelligent routing function
Strategy routing Support based on IP strategy routing
The proxy function Support Proxy ARP, DNS Proxy
Redundancy backup Support for VRRP, HSRP Hot Standby Router Protocol
Characteristics of DHCP DHCP Server, DHCP Client and support DHCP relay
Function of NATSupport the static or dynamic NAT address translation function
Safety characteristics IEEE 802.1x port certification, PKI certification
Port Security (Port Security) function
Hardware support for IP ACL ACL ACL, MAC, Vlan
Hardware support for port based user IP+MAC+Vlan ID+ user account a
variety of factors combined to bind
Support IP Source Guard
Support WEB interface user authentication
Remote RADIUS, TACACS+ certification
User classification management and password protection                                  
Net shield technology
Safety control technology
Policy control list
Quality of service IEEE 802.1Qau congestion mechanism
Each port 8 send queue mapping 802.1p 8 priority
WRED, WFQ, SP and FIFO queue scheduling algorithm
Best-Effort Service
Differentiated Service
Strict Priority
Weighted Round Robin
First come first served
TOS to mark
RTS
Network management SNMP v1/v2/v3
RMON (1,2,3,9 group)
Telnet
WEB interface
Support for cluster management
Support SSH
Support for PDP (compatible with Cisco CDP.)
To support the fan, temperature, system log, hierarchical alarm
Physical characteristics
Appearance size442mm × 285mm × 44mm
Power characteristic AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup
Power 80W
Indicator lampPower indicator, indication of system, connecting / transceiver instructions
Environment humidity / temperature 0-50 ºC operation,-40-70 ºC preservation,0-90% no condensation
 
 

You Might Also Like