GSM Mobile Signal Amplifier for 2g

China GSM Mobile Signal Amplifier for 2g, Find details about China Signal Booster, Signal Repeater from GSM Mobile Signal Amplifier for 2g

Model NO.
AP-G1
Frequency
Uplink: 890~915MHz,Downlink 935-960MHz
out Put
20dBm
Gain
70dBi
AGC
Done
Alc
Done
Sleep Mode
Done
Antenna
Indoor Penholder Antenna+Outdoor Stick Antenna
Coverage
300 Square Meters
Trademark
ATNJ
Transport Package
310*260*70mm
Specification
Size: 165*115*35mm, Weight: 1.3kg
Origin
Shenzhen
HS Code
8543709200
Model NO.
AP-G1
Frequency
Uplink: 890~915MHz,Downlink 935-960MHz
out Put
20dBm
Gain
70dBi
AGC
Done
Alc
Done
Sleep Mode
Done
Antenna
Indoor Penholder Antenna+Outdoor Stick Antenna
Coverage
300 Square Meters
Trademark
ATNJ
Transport Package
310*260*70mm
Specification
Size: 165*115*35mm, Weight: 1.3kg
Origin
Shenzhen
HS Code
8543709200
Product Description

GlobaL application ATNJ factory GSM 900MHZ 2g signal repeater 2 colors for your selection:
GSM 900MHZ 2g Pico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.   
Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.

Technical spec.

 

CDMA/GSM 800MHZ

PCS1900MHZ

GSM900 MHZ

DCS1800 MHZ

3G2100MHZ

 

UL824-849MHz

DL869-894MHz

 

UL1850-1910MHz 

DL1930-1990MHz

UL890-915MHZ

DL935-960MHZ

UL1710-1785MHZ

DL1805-1880MHZ

UL1920-1980MHZ

DL2110-2170MHZ

Gain

>65dB

Automatic Gain Control( AGC)                             

>30dBm 

Noise Figure

>4dB 

Gain Flatness

>5dB (p-p),

Automatic Gain Control (1dB step)

30dB in step of 1dB (Auto)

Maximum Output Power

UL10-20dBm DL15-27dBm

Input power range

-55 dBm~-15 dBm

Intermodulation Products

9KHz~1GHz

 -36dBm @ 3KHz

1GHz~12.75GHz

-30dBm @ 3KHz

Spurious Emission

9KHz~1GHz

 -36dBm @ 3KHz

1GHz~12.75GHz

-30dBm @ 3KHz

Group Delay

UL 1μs

AC POWER

AC 95-250V

Adapter output power

DC5.0V

Temperature range

-25ºC~+55ºC

Relative humidity

≤80%

RF interface

SMA-F

Power interface

KLD-35-13

Weight

≤0.3kg

Size

160×100×27mm