Products

8 Ports Poe Switch Power Over Ethernet Injector Switch with NVR Uplink Port

China 8 Ports Poe Switch Power Over Ethernet Injector Switch with NVR Uplink Port, Find details and Price about China Poe Switch, Power Over Ethernet Switch from 8 Ports Poe Switch Power Over Ethernet Injector Switch with NVR Uplink Port

Model NO.
PoE Switch
Power Transmite Range
Upto 250meters
Trademark
OEM
Transport Package
Box
Specification
100Mbps
Origin
China
Model NO.
PoE Switch
Power Transmite Range
Upto 250meters
Trademark
OEM
Transport Package
Box
Specification
100Mbps
Origin
China
8 Ports PoE Switch Power Over Ethernet Injector Switch with NVR UPLINK Port

This is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 1 Uplink ports. DC port apply 9~55V power supply adapter(not included), any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because  "Power Link 3~8" port using 4,5,7,8 pin as power transfer

Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 3~8" port, this will damage your device.
Gigabit(1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.


Features:
  • 8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 6-Ports PoE function
  • Midspan Mode-B Unsolicited Power(4,5+/7,8-)
  • Supports 9~55V DC power supply 
  • Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
  • Full/half duplex transfer mode for each port.
Specification:
 
ALL Port:Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable. 
 
Power Link Port 3-8-:any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs) 
 
Power LEDLED ON: power on. LED OUT: power off 
LED Light LINK/ACTLED ON Indicates the port is connected to a network device and has been started
LED OFF Indicates that this port is not connected to a network device or has not been started
 
StandardIEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full-Duplex flow control
ProtocolCSMA/CD Ethernet
Data Transfer RateEthernet: 10Mbps (Half Duplex),20Mbps (Full Duplex)
Fast Ethernet: 100Mbps (Half Duplex) ,200Mbps (Full Duplex)
IC ChipsIC Plus IP178G
Network Media(Cable)10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
PoE Power on RJ45Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8
DC Output: 9-55V, Per port Max 1A,
Number of Ports8 x 10/100Mbps Auto-Negotiation RJ45 ports with 6 PoE enabled (port-3 ~ port-8)
Power InputSupports INPUT 9-55V DC power supply
Power DC port 5.5 x 2.1mm,
inside positive (+)  outside  negative (-)
Power Consumption3.2 Watts (max. no PD connected)
According to the actual power consumption of equipment
TemperatureOperation Temperature:0 ~40ºC (32 ~104ºF )
Storage Temperature: -40 ~70ºC(-40 ~158ºF)
Humidity Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing
Product Dimensions125mm W x 68mm D x 32mm H
RAM Register Capacity64K bytes per device
MAC Address List1K entries per device 
Frame Forward Rate10Mbps Ethernet: 14880pps/Port

You Might Also Like