China S1100 Salable ICU Breathing Medical Ventilator for ICU Room Patients, Find details about China ICU Ventilator, Respirator Hospital Machine from S1100 Salable ICU Breathing Medical Ventilator for ICU Room Patients
Item | Paremeter | |
Model of ICU ventilator | S1100 | |
Language | English for standard | |
Patients' type | Adult, Children | |
Display Screeen | 12.1' LCD screen | |
Shuttle button to set parameters | ||
Ventilator | Ventilation mode | IPPV, A/C, SIMV |
Frequency (Freq) | 1 min ~ 100 min | |
Variable Oxygen | 21 % ~ 100 % | |
Tidal volume(Vt) | 20 - 2000ml | |
I:E | 4:1~1:8 | |
PEEP | 0 cmH2O ~ 40 cmH2O | |
Oscillogram (2 at the same time) | P-T (pressure - time) | |
F-T (flow - time) | ||
P-V loop (pressure - volume loop) | ||
Alarm and protection | 14 warning notice | |
Rapid oxygen supply | NO | |
ETCO2 | NO | |
Nebulization function | NO | |
Humidifier | Yes, available. Heating and wetting, real-time temperature to display | |
Air Compressor | Continuous output flow: ≥25L/min | |
to display continous working hours | ||
no noise, the DB is less 40DB | ||
Multilevel filtration of purification system | ||
Working | Gas source | O2, Air |
Pressure | 280 kPa~600 kPa | |
Power | AC electricity | 100 - 240V, 50/60HZ |
Backup battery | last to 2-3 hours | |
Packing size | Main engine | 560x560x605 mm |
G.W / G.W | 40 / 22 KGs | |
Air compressor | 683x687x1140 mm | |
G.W / G.W | 105 / 70 KG |
Trust Points
l Simplicity: easy to use, easy to move with 4 wheels.
l Choice: adapt the equipment to your patients and procedures freely
l Patient Centered Ventilation: Precision in an anesthesia ventilator, from conventional ventilation to advanced modes, including 8 modes: IPPV; A/C; PCV; SIMV; SPONT/CPAP;PSV;SIGH;MANU.
l Designed and manufactured by Perlong Medical with over 23 years experience in this area.
l Flexible configurations to suit your needs.
l International standard and advanced technology suitable for wide range use.
l Compact interface and big screen give you better operating experience.
l Over 2,000 units installed in the world.
Features
l 12.1" TFT LCD screen displays the Ventilation parameters, Alarming information and Waveform.
l Recycle breathing pipe, ensure easy operating and keep tidy.
l Multiple working modes such as volume control and pressure limit, adapt to wide range patient.
l Vaporizer with temperature, flow compensation and self-lock function, keep safety anytime.
l Multiple parameters monitoring interface, make every parameter clear, let users know the patient conditions in all aspects;
l Real time pressure-time, flow-time loop graphics and high precision O2 concentration detection function included.
l Stable and low noise air compressor, create quiet work environment for doctors.
Safety
l Three level alarming system, visual and sound alarm information.
l With lots of alarming, reminding and protection functions.
l Advanced power management control technology.
l With built-in backup power source, when outside power source goes off, back-up power source starts to work.
l Self-check before running, eliminate system mistake.
l Separate design of electric and gas, keep safety running of ventilator.
Alarm and Protection
The AC power failure alarm | Power failure or no connection |
Internal battery backup low voltage alarm | ≤11.3±0.3V |
No tidal volume | No tidal volume within 6s |
High Minute Volume alarm LowMinute Volume alarm | 5L/min-99L/min 1L/min-30L/min |
High Airway pressure alarm Low Airway pressure alarm High oxygen concentration alarm Low oxygen concentration alarm | 20cmH2O-100cmH2O 0cmH2O-20cmH2O 19%-100% 18%-99% |
Continuous pressure alarm | (PEEP+1.5cmH2O) over 16s |
Suffocation warning Fan error Oxygen deficit | 5-60s Show on screen Show on screen |
The maximum limited pressure | <12.5 kPa |
Certificates
Packing Details
FAQ
A: Yes, pls tell us your company's full name and address, email and then our salesman will contact you and provide the quotation services.
3. Q: Can you offer OEM services?
A: Yes, we can provide OEM services and print your logo on products or packing material.
The additional cost will depends on your order qty. Pls send mail to us for detail.
4. Q: How long will the ordered goods be delivered?
A: It depends on the products and quantity of the order.
1) For our regularly produced items, usually the lead time can be 20 days.
2) For OEM products, we need to order packing materials (or make mold to print your logo on products), it needs 30-45 days to produce the goods.
5. Q: what will be the payment terms?
A: -For sample order, we accept 100% TT, paypal, western union etc.
-For official order, we accept TT, LC at sight.
6. Q: Can you provide test report for each batch of goods?
A: Yes, we can. For each batch of goods, QC will do strict test. Test reports (COA) are available after finishing the tests.
7. Q: Do you have after-sales services:
A: Yes, we promise free replacement for any manufacturing defects of our delivered products. We are responsible for our delivered products in the valid time of products.