Product Description

General lathe CM6241 CM6241V
Summary:
Turning inner and outer cylindrical surface, end face and other rotating surfaces;
Turning all kinds of metric, British, analog and diametral threads;
Drilling, reaming and oil sump, etc.;
The spindle through hole diameter can be 52, 82, 105, and can be passed through different diameter bars;
A system with metric or British feed systems suitable for use in regions and countries with different lengths of measurement units;
The choice of regions and countries with manual brakes and pedal brakes, with different operating practices;
Different voltage (220V, 380V, 420V), different frequency (50Hz, 60Hz) electrical system

CM6241/41V

Parameter:
Project CM6241x1000/1500 CM6241Vx1000/1500
The turning diameter of the larger workpiece on the lathe bed is 410mm (16)
The larger turning diameter of the pallet is 255mm (10)
The larger turning diameter of the saddle groove is 580 (22)
Center height 205mm (8)
Two large distances 1000mm (40) /1500mm
The width of the bed is 250mm (10)
The cutter rod size is 20 x 20mm (3/4 "x 3/4")
Medium plate travel 210mm (8 -1/2 ")
Small pallet travel 140mm (5- 1/2 ")
Spindle through hole diameter 52mm (2)
Morse taper D1-6 of spindle hole
The large rod size 4 T.P.I
Spindle speed range 16steps 45-1800R.P.M 30-550r/min or 550-3000r/min
45 inch 2-72T.P.I (45Nos) for cutting inch thread
Cutting metric thread 39 kinds of 0.2-14mm (39Nos)
Longitudinal feed 0.05-1.7mm/Rev (0.002 "-0.067" /Rev)
Transverse feed 0.025-0.85mm (0.001 "-0.0335" /Rev)
Module range / number 0.3-3.5MP (18Nos)
Diameter range / number of species 8-44DP (21Nos)
Tailstock sleeve diameter 50mm (2 ")
The tailstock sleeve has a larger travel 120mm (4- 3/4)
Taper of inner hole of tailstock sleeve M.T.No.4
Spindle motor power 4P/8P, 3PH 3.3/2.2kw or 4.5/3kw
Pump motor power 4P, 3PH 90W
Packing size 206 (81) (256) x 90 (35-7/16) * 164CM (64-9/16)
Net weight 1300kg or 1350kg/1550kg or 1600kg
Gross weight 1500kg or 1555kg/1750kg or 1755kg