Hotel Occupancy PIR Detecting Energy Saver

China Hotel Occupancy PIR Detecting Energy Saver, Find details about China PIR Detector, Hotel Energy Saver from Hotel Occupancy PIR Detecting Energy Saver

Model NO.
HTW-61-ES6201
Dimension
115*90*40mm
Temperatuer Range
5~45 Degrees
Installation
Rail DIN 35
Protection IP
20
Output Type
No/Nc Configurable
Trademark
Neutral/Customized
Origin
China
HS Code
90321000
Model NO.
HTW-61-ES6201
Dimension
115*90*40mm
Temperatuer Range
5~45 Degrees
Installation
Rail DIN 35
Protection IP
20
Output Type
No/Nc Configurable
Trademark
Neutral/Customized
Origin
China
HS Code
90321000
HOTEL Hotel Occupancy AC/ Lighting Control System
                                                                                                             
Hotel Occupancy PIR Detecting Energy Saver
This is the solution we do for trane in middle east hotel project, a total solution for a premium hotel to control the Air
conditioning and lighting in a smart and energy saving way.
It includes 5 products: 1. energy saver 2. PIR detector 3. Door contact 4. split thermostat 5. window contact

>> If the PIR detect that there is guest in the room, the air conditioner/ lighting will be on.
>> If the PIR detect that there is no guest in the room, the air conditioner/ lighting will be off.


>> General
HTW-61-ES6201 is designed to control electrical consumption by detecting occupied/unoccupied presence, in order to connect/disconnect the air conditioning equipment and lighting automatically when the customer accesses or leaves the room.
Hotel Occupancy PIR Detecting Energy Saver
>> PIR presence detector operating algorithm
HTW-61-ES6201 has 1 input (E1) for a magnetic room contact placed on the doorframes of the room;
1 input (E2) for a magnetic window contact placed on the window frames. 
3 inputs(E3,E4,E5) for PIR presence detectors.
When the door of the room is open, the energy saving system is activated instantly, and feed the following three outputs:

S1-Air-conditioning output with anti-humidity mode;
S2-Air-conditioning/Lighting output with delay time;
S3-Lighting output with delay time;
Once the door is closed, the system will try to determine if there is movement within 3s~T4 in the room


Hotel Occupancy PIR Detecting Energy Saver
>> Magnetic window contact operating algorithm

If a magnetic window contact switch is connected to the terminals 12-13, when the contact is open, the output S1 will disconnect after 1min, until closing window contact again.

>> Typical Wiring Diagram
Hotel Occupancy PIR Detecting Energy Saver
>> Hotel Application

Hotel Occupancy PIR Detecting Energy Saver
Hotel Occupancy PIR Detecting Energy Saver


Hotel Occupancy PIR Detecting Energy Saver
>> Contact Us
Hotel Occupancy PIR Detecting Energy Saver