Washing Plant Rotary Scrubber for Ore

China Washing Plant Rotary Scrubber for Ore, Find details about China Clay Ore Washer, Rotary Washing Drum from Washing Plant Rotary Scrubber for Ore

Model NO.
RXT
Certification
CE Certificate and ISO9001, SGS
Warranty
One Year Excluding The Quick Wear Parts
Feeding Size(Mm)
Less Than 70
Installation
Under Guidance or Technician to The Mining Site
After-Sale Service
Lifelong
Trademark
Jinshibao
Specification
CE, ISO9001, SGS, TUV
Origin
Jiangxi, China
HS Code
847410
Model NO.
RXT
Certification
CE Certificate and ISO9001, SGS
Warranty
One Year Excluding The Quick Wear Parts
Feeding Size(Mm)
Less Than 70
Installation
Under Guidance or Technician to The Mining Site
After-Sale Service
Lifelong
Trademark
Jinshibao
Specification
CE, ISO9001, SGS, TUV
Origin
Jiangxi, China
HS Code
847410
Application and performance
RXT ore washing machine is the most advanced ore washing equipment at present in China. It is able to de-slime of the sand and stone, the drum inside is equipped with single or doublelayer round screen can get 2 to 3 different size of sand stone products, To which is applied pre-concentration of the materials contain mud, to promote the beneficiation index in the later steps and it is widely used to the washing of manganese, iron, limestone, tungstenore, silica and so on. The slurry material feeds into the drum where it is vigorously scrubbed, the soil matrix is broken up and the target mineral is released. The material is then screened through the rotating screen and waste is ejected. The screened material is then passed on to the concentrating modules for upgrading.


Features
1. Designed to break up alluvial gravels, clays and sand
2. High capacity and high power scrubbing
3. The long drum of the scrubber retains material for longer, more vigorous washing for complete separation
4. One high output electrical motor driving a gear system providing efficient torque
5. Adjustable rotary speed
6. The water with high pressure flushed the inwall of drum
7. Can accept material up to 230mm
8. Mechanical sealing of inlet chute-minimal spillage when over feeding
9. Drive loads absorbed within the drive frame and pivoting drive frame design
Foundations only have to support vertical load and are not critical for alignment ie minimal cost
10. Shell design less mass than conventional roller supported units-installation craneage requirement reduced
Model Drum
Size
  (mm)
Screen
size      (mm)
Rotation
speed      (r/min)
Feeding
size   
  (mm)
circulating
water
(t/h)
water
consumption

  (M 3 /h)
Angle
of
inclination (° )
Capacity (T/h) Power (Kw) Weight (T)
RXT
1030
Φ 1000× 3000 ≤ 20 27.9 ≤ 80 20-30 1 ≤ 10 40 15 3.8
RXT
1136
Φ 1100× 3600 ≤ 25 27.6 ≤ 80 32-50 1.2 ≤ 10 65 15 4.6
RXT
1230
Φ 1200× 3000 ≤ 25 27.6 ≤ 100 35-60 1.3 ≤ 10 70 22 4.7
RXT
1430
Φ 1400× 3000 ≤ 25 27.6 ≤ 100 40-70 1.5 ≤ 10 80 22 4.9
RXT
1545
Φ 1500× 4500 ≤ 25 21 ≤ 160 60-110 1.7 ≤ 10 120 30 6.9
RXT
2265
Φ 2200× 6500 ≤ 50 19 ≤ 230 90-150 1.8 ≤ 10 180 37 15.9